Hi,
Guest
Search results for all lists
List: usrp-users@lists.ettus.com
From: Ian Buckley
Re: [USRP-users] XISE project USRP3 B200
Tue, Jul 7, 2015 7:23 PM
Review usrp3/top/b200/Makefile.b200.inc and also usrp3/lib/*/Makefile.srcs to see how to add new source files to the project.
List: usrp-users@lists.ettus.com
From: Swanson, Craig
Simulating moving_average with modelsim and recieving a Makefile error related to /lib/ip/divide_int16_int32
Tue, Nov 17, 2015 5:17 PM
I get the following error:
/lib/rfnoc/noc_block_moving_avg_tb: make vsim GUI=1
Makefile:55: uhd/fpga-src/usrp3/top/../lib/ip/divide_int16_int32/Makefile.inc: No such file or directory
make: *** No rule to make target 'uhd/fpga-src/usrp3/top/../lib/ip/divide_int16_int32/Makefile.inc'. Stop
Craig
Craig F.
List: time-nuts@lists.febo.com
From: SAIDJACK@aol.com
Re: [time-nuts] need recomendation for a portable 10mhz referenceoscilator
Wed, Dec 12, 2007 4:53 AM
bye,
Said
**************************************See AOL's top rated recipes
(http://food.aol.com/top-rated-recipes?NCID=aoltop00030000000004)
List: time-nuts@lists.febo.com
From: SAIDJACK@aol.com
Re: [time-nuts] need recomendation for a portable 10mhz reference oscilator
Thu, Dec 13, 2007 10:11 PM
bye,
Said
**************************************See AOL's top rated recipes
(http://food.aol.com/top-rated-recipes?NCID=aoltop00030000000004)
List: time-nuts@lists.febo.com
From: J. Forster
Re: [time-nuts] Difference in GPS antennas
Fri, Aug 14, 2009 3:15 PM
I removed a set of screws on the bottom that looked like
> they
> were holding the top on. I still couldn't get the top off. I assumed it
> was
> glued on which could make a weatherproof seal. But then why did they
> bother
> with the screws?
>
>
>
> --
> These are my opinions, not necessarily my employer's.
List: time-nuts@lists.febo.com
From: Dr. David Kirkby
What's the best way to double 10 MHz to 20 MHz ?
Wed, May 25, 2011 7:52 AM
Q: Why is top-posting such a bad thing?
A: Top-posting.
Q: What is the most annoying thing in e-mail?
List: time-nuts@lists.febo.com
From: Dr. David Kirkby
Re: [time-nuts] Removing thermal tape residue?
Sat, Feb 11, 2012 7:48 PM
Q: Why is top-posting such a bad thing?
A: Top-posting.
Q: What is the most annoying thing in e-mail?
List: time-nuts@lists.febo.com
From: Magnus Danielson
Re: [time-nuts] Questions about Austron 5000 Loran C receiver
Sat, Mar 3, 2012 7:25 PM
http://www.loran.org/ILAArchive/ILA%20Journal%20Final%20Scans/1977-Journal.pdf
Top of page 63 (page 65 in PDF).
You see the actual receiver on top of the PDP-8/E. The question is if
you have the full set or not.
It is actually a digital receiver where each of the 8 channels samples 3
samples with 12 bits, timed appropriately.
List: time-nuts@lists.febo.com
From: Jim Lux
Re: [time-nuts] Power Supply for AD9852 / AD9854
Sun, Mar 16, 2014 4:56 PM
.
> For the AD9851 I'am planning to put external radiator glued on top of it.
>
It's not the power dissipation of the regulators that's the concern,
it's the dissipation of the 9854. A heatsink on top doesn't do much for
it, since the thermal path is out through the bottom and/or the leads.
List: time-nuts@lists.febo.com
From: jimlux
Re: [time-nuts] Using lasers for data transmission
Sun, May 1, 2016 2:40 PM
You should bear in mind that if you're doing "mountain top to mountain
top" type applications there might be someone looking at you with
binoculars or a telescope, which makes their "light gathering aperture"
much larger, and increases the risk of injury.