One that feeds the tank from the DD return centre on top. Tank is vented and has a fill cap on top as well. Two lines run from each end of the tank. These lines pull from the tank close to the top of the tank. They cross over and feed the main saddle tanks opposite sides in the boat. Circulating the fuel and ballasting the boat as you cruise along.

After the levels reached the top of the sight gauges (several inches below the tank tops) we continued filling clear up to the tanks' tops, keeping track of the amount of fuel added after the level went out of sight in the tubes. With a known tank capacity in hand, I was then able to convert each 10-gallon mark into actual remaining gallons in each tank.

For N210, look in top/u2plus for the top level files. Both the USRP2 and N210 contain very similar designs and instantiate all the same underlying blocks. Only the top levels are different. > 2. Besides the application notes and the header files for each .v > file, is there some more documentation to be found? Not much.

> > The top block for the FPGA in N210 is here: http://code.ettus.com/redmine/ettus/projects/uhd/repository/revisions/master/entry/fpga/usrp2/top/N2x0/u2plus_core.v Start at the top and work your way into the code.

e310.v is the top-level. E310-specific modules are also in usrp3/top/e310. We also pull in a lot of modules from usrp3/lib/*. Cheers, Martin

I ran the following commands from /uhd/fpga/usrp3/top/x300 source .

Ken's various accomplishments included... #5 T1 time, #6 bike, #19 T2, top 10% run, and top 40% swim. Excellent work, Ken!Kelly Beauchamp finished 1st in her age group... PODIUM!... and top 20% overall. Kelly also was #12 T1, top 15% T2, top 20% bike, top 30% swim, and top 33% run. Nice job, Kelly!

the website.

> PPPS: I have already ruled out electric stove tops. Will have > microwave though....

`/home/arondightxia/gnusrc/uhd/fpga-src/usrp3/top/b200' make[1]: *** No rule to make target `build-B210//b200.bit', needed by `bin'.