I struggled with the same problem and decided on the newer aluminum frames with a thin skin of fiberglass on top Hi I am in the process of building a hard top. Like you I will use a welded aluminum pipe frame covered by well something? I have not been able to find a source for fiberglass sheet material.

Here's my attempt at an OpenSCAD maker coin, using some code that I developed as part of that tap stuff that was done a few months ago: https://www.printables.com/model/1194952-openscad-maker-coin It has radially-extruded text and different upper and lower fillet diameters.

For the record, I've been a subscriber to the Panbo website for two or three years and recommend it highly for anyone interested in a focus on the bleeding edge in the marine electronics world.

The Waterway Guide website has a very good fuel pricing page. They call hundreds of marinas *every week* to get prices. I have seen none better. Tom Tadhana 3612 Deltaville VA Note ! am the Managing Editor Waterway Guide, but the facts do not lie.

This appears to be plaintiff attorney website (the maritime equivalent of an auto accident ambulance chaser). They may have us confused with fishing trawlers. Might ask them what they do for the owners of the vessels. Also might get Al Golden's input. Tom Collier Sent from my iPhone

So who is going to be the first one to reach the "Cherry On Top Tier"?? In addition to the plethora of scheduled club workouts, our club sponsors French Creek Racing and Mid-Atlantic Multisport offer many opportunities for outdoor swimming including both OWS and pool. For more information...

Regarding the battery: > I used a 2032 coin cell battery and holder I un-soldered from an dead PC otherboard. Even a coin cell will last its shelf life at least. According to the manual the module is designed for a rechargeable type hile the lithium coin cells I'm aware of (e.g. 2032) are primary and not echargeable.

They built a female one-off mold and created a balsa cored top. It fits the existing aluminum "salt shaker" or "T-Top" framing perfectly. It is beautifully smooth and fair. On my 32, the weight is certainly un-detectable. It cost about twice as much as new canvas, so I think it was very reasonable.

From Paul Cianfaglione: 11/26/12 - Hartford/Wethersfield, Goodwin Park Ponds and Golfcourse -- 1 CACKLING GOOSE, 1 BRANT. From John Oshlick with Greg Hanisek: 11/26/12 - New Haven, East Shore Park -- 3 Cave Swallows, 1 Orange-crowned Warbler.

All you need is a step recovery diode driven by the 10 MHz sq wave or spikes, and a couple of amplifiers. Might have to keep it in a beer cooler, but nothing's perfect :-) Don Chris Albertson > On Wed, May 15, 2013 at 10:05 AM, wrote: > >> Re: Trimble Thunderbolt, any easy way to create 500 MHz >> >> 2.