Emery" <die@dieconsulting.com> wrote: > Which leaves the other question, from reading the 58540A > literature, manual and other material available I concluded four years > ago that it adjusted the 1 PPS timing to track GPS once locked to GPS by > adjusting the EFC for the OXCO (I quite distinctly remember a statement > being made in the documentation that the

Europe Standard Time, die@dieconsulting.com writes: Mine is off more (or was until it died a couple of weeks ago). But I have yet to attempt the full cal procedure for reasons similar to yours.

I'll let the battery die (and hopefully lose the ephemera data) and restart and see what happens. Tom Frank, KA2CDK

On Thu, Mar 13, 2008 at 11:32 AM, Hal Murray wrote: > > > I'll let the battery die (and hopefully lose the ephemera data) and > > restart and see what happens. > > How often is the data in the satellites updated by the ground stations?

. > USCG couldn't tell the politicians that "people will die" so it was a > savings to be achieved.

Group, I haven't been following this thread that won't die, but I've contributed to others :^) If the problem is that it is expensive to detect when a bullet hits a target half a mile away, then have I got a solution for you!

The thunderstorms die down and you can really hear a *long* ways. The path you are talking about is quite possible. Bob On Dec 8, 2010, at 6:05 PM, Stan, W1LE wrote: > Hello The Net: > > I estimate /B MBD to be in DM79lt, in Westminster, CO.

Out of maybe a hundred or so in the fleet, we see maybe one or two die each month. On the SR620 the power supply also seems to go from time to time. Both have the normal keyboard and display issues, but those can be fixed. If you go back to things like the 5335, the weak point is the input amp, it blows if you get +5 on it.

It would be interesting to see the die sizes. Another advantage of the CPU solution is that you can make a large class of changes by just tweaking the software. For example changing the input from 10 MHz to 5 MHz or 1 MHz. That's also a disadvantage - somebody has to write the software.

The "engineering prototype part" (generally same die, just doesn't get the screening and paperwork) is only $3.5k in Q1. (you can also get an Eval board with the part for the same price) I wonder if the same part, without the space processing, is available?