I modified one die set to fit 4/0 cable and used it several times. I've seen several similar 16 ton hydraulic crimpers on e-bay for $30 prehaps worth the risk/buy. I also used the smaller dies to swage wire rope and that ok as well.

Unlike the bizarre hack concern above, I think if it was easy to extend the core then people would be proposing all sorts of changes. I think it makes more sense to keep things as they are and allow libraries to extend the core (as is already basically possible).

When fitted properly, and they're very easily fitted, these shouldn't leak at all. If they have a downside it's that same thing that makes them work so well to start with, the ring bedding itself into the outer of the copper pipe, especially as there can be a tendency to overtighten despite warnings to the contrary.

Gallery 96 Tacoma will continue to host two live events per year with all details posted on the gallery website or, to receive updates and special invitations, contact Mark Hoppmann at the gallery 253-495-1830.  #####   For additional information: Gallery 96 Tacoma www.gallery96tacoma.com       Phone: (253) 495-1830

I just addressed my way of getting rid of chlorine, hose, and other taste from water AFTER the tank, and all of a sudden we are debating the life-span of chlorine. Good grief. The following clip is from the Centers for Disease Control government website: "Public water systems generally are disinfected with chlorine.

The poles for all these houses carry one hot > wire on top, off a single insulator, plus there's a ground or neutral, the > telephone, and TV cable, and that's all we have on a pole. They just bug > onto the top line with the fuse blow-out, and into the transformer.

When you register let us know you’re coming from afar and we will provide all the assistance we can in ensuring you enjoy your time while you are making such a generous donation. We hope to hear from you!

All children and teens are free. Please fill out registration. Please as well note I am looking for more hands on craft experiences and can market these on our Facebook page. This event draws 5K over the entire weekend. Please reach out for more info, or register to be a vendor.

It`s undeniable that the combined experience/knowledge of *all* list participants may benefit us. Topics such as electronics, diesels and refrigeration for example, are of immense interest to us all, regardless of where we live.

I've been pondering the task of making a box where the inside joint between the walls and base is rounded and the top edge is rounded. To do this for a general box (with an arbitrary shaped base) appears to be very difficult. Regarding run time, hull() can be slow.