Some of the manufacturers' installation instructions or websites cover some of this and have tips. Try www.airmar.com who manufactures many of the transducers commonly used.

The top 50 will be determined by “Likes”, and those photos will be developed and displayed at eTc Tacoma (907 Pacific Ave, Tacoma, WA 98402). >From September 18-20, in-person voting will take place of the top 50 at eTc Tacoma. Anyone can vote, and voters will be asked to choose their 5 favorite photos.

You may want to check the noise performance of the PLL on the ADI website's PLL simulator.

These units have two labels on the top of the unit - one large and one smaller. These units are programmable over a small range using the RS-232 interface. 2. The "1pps only units". These need only +15V on pin 1 and only have the 1pps output on pin6. These units have only the smaller label on the top of the unit.

There are prizes up for grabs for individuals as well as bragging rights for the Atlas project that tops the most metrics. Help us ensure Ontario comes out on top!

Morris received top prize at the European Independent Film Awards, and was recognized as one of Musical America’s Top 30 Movers & Shapers and the Puget Sound Business Journal’s 40 Under 40.

The antenna rotator wires took the charge then jumped from the rotator control box sitting on a shelf above the radios, down about 8" to the supposedly safe top radio in the stack, then jumped from one radio to the next...

Especially the part where the divers die. Just because you can get certified in a few hours doesn't mean that it's not dangerous. Just my two cents. And by the way, don't you find it interesting that you never hear people proposing higher taxes to pay for increased Coast Guard coverage?

It also might report more sat’s than the firmware expects and everything would quickly die. That’s certainly the case with retrofitting some of the other early GPSDO’s. I think I’d rather play with faking out non-GPS version.

And > > in a flexing joint like the top of the extruder on an E5+, would > > weaken the tubing with that depth of cut, so to improve on the 10-32 > > fit and grip, a slightly deeper cut and better grip might be to try > > a 10-24 nut, which might not cut quite as deeply as an m4, but would > > cut a bit deeper than a 10-32. Worth trying anyway.