Let us all know what fixes things. > Norm

The one thing I have found on coating systems (as well as every other aspect of this boat that I have sought advice on) is that if you talk to ten different professionals or vendors--you will get at least 20 different "do it this way or die" opinions.

Sometimes I crimp it in the next smaller die to get a firm fit. Anyway I find the ratcheting crimper easier to use than the inexpensive "plier" type. For big wire lugs, I use the Ancor "hammer on" crimper. Its inexpensive and works well. With Ancor lugs, I can use a big pair of pump plier to sqeeze it rather than hammer on it.

Although you may not NEED a genset regularly, they are a "necessity" on those occassions where your electrical usage exceeds your expectations, such as accidently leaving some device operating and you batteries "die". Or a malfunctioning device such as a frig thermostat which does not shut off as expected.

I started doing this for bilge pump wiring that was close to the bilge water, and liked it so much I continued with it on all wiring. Regards, Andy Andy & Linda Woods Grand Folly 1970 Grand Banks 36 Classic Georgetown, MD awoods@surfbest.net

Next fishing hole, the engine wouldn't crank at all. Got it going with hand start. Didn't want to ruin a good day of fishing! It's not easy hand starting a 70 four stroke and I wouldn't recommend it as a backup. About the third fishing hole, had a real hard time getting the engine going again and if I went to idle for more than a second, it would die.

Boating that is, sure keeps your skills sharp and all the time you have new opportunities to become even more diverse. This time my problem is with my Onan MDJF 15 KW.

(I always want to type GoldFinger...for some reason, No Mr Bond, I expect you to die!) If that fixes the preview for you, could you post the info from Help/Library-Info, it often points to a graphics driver problem (different to the CGAL issue). You could try updating the driver.

I know these are pretty generic answers, but you did ask a pretty general question :-) Steven Knudsen, Ph.D., P.Eng. www. techconficio.ca www.linkedin.com/in/knudstevenknudsen Du bist die Aufgabe.

Hi All, I have built a TDMA system that uses the B200mini. In doing a simple test to look at processing load for transceiver operation (B200mini transmits when it is told, otherwise is receiving), I noticed an interesting effect.