I am >> transmitting at baseband (fc=0) with a fs of 250e3. When I send a 250 >> sample burst with the I/Q parts being float32 and being set to 1.0, I get a >> burst on the Rx end that is about 1330 samples long, sometimes more >> sometimes less.

> -Ian > > On Fri, May 27, 2016 at 1:10 PM, Marcus D. Leech > > wrote: > > On 05/27/2016 04:02 PM, Jeremy Hershberger wrote: >> Ian, >> >> I was able to tune to 50MHz and computed the difference >> between target and actual frequency and got 0 Hz.

to usrp2 setting the center frequency at 1590 MHz, one using sc16, fs 25 MHz and the other sc8 wireformat fs 50 MHz; regardless of the spike at 1600 MHz (10 MHz off the fc) which I don't know why it shows up on both spectrum (I can interpret the spike at the center frequency as dc component but don't know about this one); so it looks like for the sc8 the spectrum

I am using a little QFN28 for the CP2102 USB-to-serial converter on my new FC Oncore Eval Board design. There are a couple of tricks I have found that work well. 1.

. > > Arnold > > On Mon, 20 Apr 2009 10:25:28 +1200, Bruce Griffiths wrote: > > >> Arnold >> > > >> Some of the early equipment produced by NIST used mixers from a company >> that eventually became into Minicirucits. >> > > >> Suitable candidates from the Minicircuits range are: >> > > >> TUF-1H+: >> http://www.minicircuits.com/pdfs

Webinar: Guide to Getting Published Thursday, November 1, 10:00 - 11:30 ET Description: This free webinar is for anyone looking for more information about a process that can be shrouded in mystery. No particular field and scholarly journal is emphasized, so anyone in any field will find this useful.

Beamer Conservation Area Grimsby, Ontario, Canada Daily Raptor Counts: May 10, 2007 ------------------------------------------------------------------- Species Day's Count Month Total Season Total ------------------ ----------- -------------- -------------- Black Vulture 0 0 0 Turkey Vulture

Joseph Gray wrote: >> If anyone has the manual on the HP 8970B noise figure meter (10-1600 >> MHz, a bit higher with an option), could they scan me pages 1-1 and >> 1-2, as TIFF files but do *not* convert to pdf. The manual is on the >> Agilent site, but those two introducory pages are missing.

I pulled with me some gear (CNT-90 and SR620) for him to play with, so a good warmup exercise was to measure the offset between the PPS and the clock output (5 MHz or 10 MHz). > > The results was uhm... spread out... so we felt like sending you guys a report. > > First out was a RAPCO 1804M which has a HCD 66 SC 5 MHz oven diciplined by an old Trimble SV6+

Tom Holmes, N8ZM -----Original Message----- From: John Moran, Scawby Design Sent: Tuesday, March 01, 2022 5:12 PM To: time-nuts@lists.febo.com Subject: [time-nuts] Re: GPSDO - GPS1300-10-1000 by RFX Ltd. UK Bob, Jim - Thanks for the detailed replies.