I found that phone (Windows Mobile platform) VERY CUMBERSOME to use in tethering mode, and very difficult for the admiral to use. It required at least a dozen keystrokes to turn off the "phone" mode and then turn on the "Modem" mode. Same series of steps to return to "Phone" mode. Completely manual; no automation at all. Time consuming and confusing.

In my case I need a system that can be powered with battery, possibly small and mobile (quite conflicting requirements). However at the moment proposition of any system that is able to sustain 200MS/s and store it will be good. Best Regars, Piotr Krysik

On Tue, Mar 31, 2015 at 3:58 AM, Amber and Sarosh wrote: > We are following this wiki http://openbts.org/w/index.php/E3x0 in order to > install OpenBTS along with all the other dependencies on Ettus USRP E310. > After the installation, when OpenBTS and subscriber registry are run, > network is detected but no mobile handset is able

thanks, =Randy= ____________________________________________________________________________________ Be a better friend, newshound, and know-it-all with Yahoo! Mobile. Try it now. http://mobile.yahoo.com/;_ylt=Ahu06i62sR8HDtDypao8Wcj9tAcJ

Thanks as always for all that you are doing to advocate for adult learners-- -Amanda -- *Amanda Bergson-Shilcock*, Senior Fellow *National Skills Coalition* Pronouns: she/her/hers 1250 Connecticut Avenue NW, Suite 200, Washington DC 20036 215-285-2860 (mobile)

All, Here are the agenda, the meeting link, and some of the attachments for our meeting on Wednesday morning. Additional attachments to come tomorrow. Deborah Kennedy is inviting you to a scheduled Zoom meeting.

/top/USRP2/u2_core.v:617: error: Unknown module type: vita_rx_chain ../sdr_lib/dsp_core_rx.v:148: error: Unknown module type: sfft ../top/USRP2/u2_core.v:645: error: Unknown module type: vita_rx_chain ../top/USRP2/u2_core.v:666: error: Unknown module type: ext_fifo ../top/USRP2/u2_core.v:694: error: Unknown module type: vita_tx_chain ..

TOP is the point at the TOP of the object. The X axis is LEFT and RIGHT (right being +X). The Y axis is FRONT/BACK, with FRONT being -Y. FRONT being the negative Y is a little confusing at first, but makes sense when you visualize it. It’s the result of +X being RIGHT. For all the basic shapes you can say cube([2,3,4], anchor = TOP) for example.

For your purpose (I think) that you want to eliminate all triangles that have non zero Z values for the normal vector. Doing so will produce a model that looks like the attached picture.

I have some questions and normally on the Newf-L website I would get chastised and yelled at for this, but I’m going to try here. >>> >>> We are looking to add an addition to our family. A second newf. We really want a landseer this time. Yes, I have heard all the comments about how a black will bring you your newspaper and a landseer will read it to you!