site=steering&type=us&library=1025 and download "Hydraulic Steering Selection Guide Rev 13" (in the top line on that page), you may find some useful information. If you have Teleflex helms, you could email their tech support for assistance.

> > I've never visited this website before, but there are still snapshots > on Internet Archive: > > https://web.archive.org/web/20171226213902/http://daid.eu/~daid/3d/ > > That snapshot doesn't appear to work, but there is a link at the top > right to the source code of the tool: > > https://github.com/daid/OpenSCAD-polygon-editor > > Use the green download

Looking at top, my CPU resources never goes over 30%. However, I get an "S" (sequence error on TX) very frequently. HOWEVER, if I set the MTU of the NIC to 1500 (the default MTU), then the sequence errors goes away. I don't understand why this is happening.

Tacoma, WA, 98405 [cid:image003.jpg@01D1E1CB.777BD570] website | facebook | twitter | instagram

Attila, a quick look at the "système universitaire de documentation" website list the university libraries where a paper copy is available for loan: http://www.sudoc.fr/008747431 (click on the "Où trouver ce document?"

There is something positively Tesla-ian about Omega with high power low frequency transmitters into physically enormous antennas - like the one with the top hat across the fjord. None of this tiny L-band patch antenna stuff inside a wristwatch.

You could try one of the binaries from the examples supplied with uhd, for example rx_samples_to_udp,or _to_file and see if it runs without a GUI on top for the desired amount of time (warning: 15 minutes of 8Msam/s will be around 29 GB, so make sure you're not filling up your SSD inadvertently).

McIntyre via USRP-users < usrp-users@lists.ettus.com> wrote: > I’ve downloaded the latest drivers off the VIA website (which are newer > than the cards’ manufacturers’ drivers), as well as the manufacturers’ > drivers.

DE 206693267 VERTRAULICHKEITS-INFORMATION: Dieses e-Mail und alle anhängenden Dokumente, enthalten Informationen der Konrad GmbH und sind nur für die adressierte Person bestimmt. Diese können vertraulich und/oder von Veröffentlichungen ausgenommen sein. Das Kopieren und die Weitergabe an nicht autorisierte Dritte sind verboten.

If all you want is frequency, then the start and end sample *may* have all the information you need in them. If you are trying to recover modulation, then both approaches have issues. They just have different ones.  It all depends on what you are trying to do.