White-rumped Sandpiper - May 26-30, RN du Marais-Trépanier, Gatineau. Pectoral Sandpiper - May 26, RN du Marais-Trépanier, Gatineau. Short-billed Dowitcher - Reported May 26-Jun 01, RN du Marais-Trépanier, Gatineau. Whimbrel - (14) May 27, Shirley's Bay (boat launch), Ottawa. (26) May 30, Britannia CA (general location), Ottawa.

LB>> Regarding flash/no-flash bootleg versions - mask ROM firmware LB>> residing on the die does not support FTS functions (there is not LB>> enough space for extra features and increasing the die size would LB>> increase base product cost) so if you have FTS product then it LB>> must have flash inside to run the code from.

Alternative > reference clock rates are quite easy to add. > > Matt > > > > On Wed, Feb 26, 2014 at 6:36 AM, Robert Palumbo wrote: > >> Hello, >> >> I'm looking at the datasheet for the LMK04816 clock chip on the X300, to >> try and determine if I can lock to other frequencies besides 10MHz (either >> 80MHz or 100MHz). >> >> It looks like you

Bob On Feb 26, 2014, at 9:01 AM, Jim Lux wrote: > On 2/26/14 12:44 AM, Hal Murray wrote: >> >> richard@karlquist.com said: >>> Solid dielectric cable and connectors of 3.5 mm size are mode limited to 18 >>> GHz. That is why there is so much stuff rated at 18 GHz as opposed to 16 or >>> 20 GHz. >> >> Thanks.

It is *very* easy to get hung up on numbers that, in the end, turn out not to matter very much. Bob > On Oct 26, 2022, at 4:49 PM, Chris Caudle via time-nuts wrote: > > > On Wed, October 26, 2022 1:14 pm, Thomas Tammann via time-nuts wrote: >> I am an audio nut ;-) and we rely nowadays more and more on good >> oscillators.

Sterling, All the cruisers are anchored out just around the bend from a dock that has a sign saying " Gas - Diesel - Mortgages ". They'll all come back out after the fuel prices come down.

ASSISTING BUYERS AND SELLERS, PROFESSIONALLY FOR 20 YEARS ************************************************************************** Thank you all for your response to the 38'Gulfstar Motor Yacht in Louisiana. There is a deal pending.

The water had some = black=20 debris on top and its color gradually changed from red to pink to clear = at the=20 very bottom point.

The black stuff all over the PCBs is the remains of the foam.

Can one create a "module", and either show all of the internals for the module, or not, so as to hide the code inside the modules? Jon On 1/10/2017 9:44 PM, MichaelAtOz wrote: Post didn't make the mailing-list, copied below. c.levastre wrote Hi all. I like and use openscad for my 3D designs.