Another thing that helps is a cooler for all the liquids and container goods. We keep a cooler filled with stuff in the cockpit. With our small refrigerator, we couldn't get along without it. I have an icemaker which makes it easy to supply ice when at the dock. I have no generator to make ice under way, but I'd sure like one.

Al writes: >I'm not sure if all boats (I only know mine) have a lip on the transmission f>lange which mates to the shaft coupling. This looks to be a pretty tight fit >and takes the weight of the shaft. With the shaft coupling sitting on this >lip it is a relatively easy thing to run the feeler gauges between the mating >surfaces.

At a distance, one could hardly tell all of them apart. All three boats had an impressive amount of inside space for their size, a characteristic of every boat the Lazzara family built, and were about as inexpensive to run and bullet proof as one could ever ask for.

Can one create a "module", and either show all of the internals for the module, or not, so as to hide the code inside the modules? Jon On 1/10/2017 9:44 PM, MichaelAtOz wrote: > Post didn't make the mailing-list, copied below. > > c.levastre wrote >> Hi all. >> I like and use openscad for my 3D designs.

It seems to me that I read some where that using Easy Off oven cleaner works best, but it needs to be unscented variety. Do I have the facts straight, and is there anything special I should know about, about doing this project. Any & all suggestions will be greatly appreciated. Yes, Easy Off works on gelcoat and two part poly paints to remove a name.

The address is slightly different but functions are all the same and it's easy for all of us. You should have received an e-mail confirmation about being added to this new list, how to reply/start discussions and easy ways to now un-subsribe or even explore more in detail the service.

If it was easy - every time-nut would be doing it! Do let me know if you come up with a solution. Skip Withrow

All very easy after a couple of small hiccups as noted. In conclusion, the PN2060B Phase Noise Analyzer is an excellent, low-cost and easy-to-use instrument. Regards Drew VK4ZXI http://vk4zxi.blogspot.com/2023/07/an-economical-way-to-measure-phase.html

u=b26b7e6691bb4baad98119861&id=12015b83cc&e=072d232495) -- it's easy! The Working Artist Photography Award is open to all photographers in all traditional and non-traditional photography genres and styles. We welcome street and documentary photography to abstract and emerging representation.

. > > > -- > Dave Emery N1PRE/AE, die@dieconsulting.com DIE Consulting, Weston, Mass > 02493 > "An empty zombie mind with a forlorn barely readable weatherbeaten > 'For Rent' sign still vainly flapping outside on the weed encrusted pole - in > celebration of what could have been, but wasn't and is not to be now either." > > > __________________________