. > >The flow diagram for the Dahl filter (presumably very similar to Racor) >shows that fuel enters at the top and is first sent down to the separation >zone at the bottom and then rises up to the filter element near the top >where it flows from the outside to the inside and the exits to the engine.

Is this feeder easy to locate ?? in the park its bin years since I have gone in to that area .

It was easy to slug 26 of them into place. I intended them to be temporary, but replacing them is down a ways on the "to do" list. Of course either concrete or sand is very inexpensive, but not as dense as lead or steel, and harder or impractical to really secure in place. Moveable ballast is nice, because you can move it.

At 10:30 AM 07/26/2001 EDT, Thataway@aol.com wrote:. > >Yes, the immediate treatment is Oxygen--and if a boat that has oxygen is >readily available go there.

for instance, if your macerator is installe in the engine room, or in a generator room or anywhere noisy, it's not easy to hear it... since typically, one runs the macerator offshore, machinery will be running...

Easy for the admiral to handle. still look good, In some cases, where I always need chafe protection at a particular spot., used shrink wrap in lieu of hose.

Neon John wrote: > On Wed, 26 Dec 2007 11:30:05 -0800, Jeff Mock wrote: > > >> Smart Tweezers >> http://www.advancedevices.com/ >> >> It's an RLC meter packaged in a pair of tweezers. It's accurate and >> fast, feels good to use on the bench.

On Dec 2, 2008, at 1:01 PM, time-nuts-request@febo.com wrote: > Message: 1 > Date: Tue, 02 Dec 2008 11:26:34 -0800 > From: "Burt I.

On Wed, Mar 26, 2014 at 8:41 AM, Bob Stewart wrote: > Thanks Charles. That makes sense, but at the expense of adding unwanted > complexity. As I've been moving the setpoint around this morning, I think > I see a way to characterize what it's doing.

Or if someone knows of an OCXO where the oven power is separate from the oscillator power, that would make it easy. Darn these highly integrated parts..