>From Frank Mantlik 5/10 Stratford yard - CUCKOO of undertermined species flew through the yard this morning. 3 warbler species. Also 2 PINE SISKINS still visiting feeders.

From Scott Kruitbosch: 10/31/11 - Stratford, Stratford Point -- Over 40 species so far today including 1 VESPER SPARROW, 2 EASTERN MEADOWLARK, ~25 RED KNOT, 4 AMERICAN PIPIT, 2 Eastern Bluebird (very rare at the site), 1 Northern Harrier.

As occurred last week, the immature NORTHERN GANNET was seen over Hamilton Harbour, on the Skyway side of Pier 25, between 08:00 and 08:30 YESTERDAY, Dec. 10, 2002 TAke the QEW to Eastport Drive, follow Eastport to Toolgate POnds. Look for two tall construction cranes on the bridge side of the harbour, and the big Dofasco sign across the harbour.

Hi, Brian: As you know, I'm reticent to put forth an opposing point of view, but here goes: Racor recommends 30 or 10 micron primaries with a 500-hour change interval; Lugger recommends changing the secondary at 600 hours. Based on experience, I believe that's conservative, and so I go about twice that.

On 11/22/09 10:12 AM, "Larry" wrote: > What is your destination after reaching Memory Rock? > > Where do you clear Customs if not the West End/ As we have discussed before here, Bahamas requires that you hit the first place you can clear customs.

In 120 degree F water, this takes 10 minutes, 125 only takes 2 minutes, 140 6 seconds, 150 two seconds. Children burn more easily. How many of us have diabetes or other conditions that may cause some degree of peripheral neuropathy. Maybe we should take a look at a possible serious injury source of the hot water temperature in our boats.

http://www.ourfairdeal.org/ > -- > View this message in context: http://forum.openscad.org/Compiling-for-64-bit-Sparc-Solaris-10-tp10741p11516.html > Sent from the OpenSCAD mailing list archive at Nabble.com. > > _______________________________________________ > OpenSCAD mailing list > Discuss@lists.openscad.org > http://lists.openscad.org/mailman/listinfo/discuss_lists.openscad.org

. -- View this message in context: http://forum.openscad.org/Compiling-for-64-bit-Sparc-Solaris-10-tp10741p11544.html Sent from the OpenSCAD mailing list archive at Nabble.com.

-- View this message in context: http://forum.openscad.org/Compiling-for-64-bit-Sparc-Solaris-10-tp10741p11569.html Sent from the OpenSCAD mailing list archive at Nabble.com.

Hello Martyn, Martyn Smith wrote: Despite the AGC we still achieve good phase noise (-135 dBc/Hz @ 1 Hz with a -168 dBc noise floor) together with 130 dB isolation and 10 ps/C phase stability. I have problems to understand, how your amplifier can achieve phase noise of -135 dBc/Hz @ 1 Hz.