For the most part, you will die if you only receive CPR in a boating or cruising situation for cardiac arrest. In addition to many studies like this, there are multiple books written on this exact subject. I'd refer anyone to "Sudden Death and the Myth of CPR" which I have read (http://tinyurl.com/6w3lc).

DE 206693267 VERTRAULICHKEITS-INFORMATION: Dieses e-Mail und alle anhängenden Dokumente, enthalten Informationen der Konrad GmbH und sind nur für die adressierte Person bestimmt. Diese können vertraulich und/oder von Veröffentlichungen ausgenommen sein. Das Kopieren und die Weitergabe an nicht autorisierte Dritte sind verboten.

. -- Dave Emery N1PRE, die@dieconsulting.com DIE Consulting, Weston, Mass 02493 "An empty zombie mind with a forlorn barely readable weatherbeaten 'For Rent' sign still vainly flapping outside on the weed encrusted pole - in celebration of what could have been, but wasn't and is not to be now either." ______________________________________________

. -- Dave Emery N1PRE/AE, die@dieconsulting.com DIE Consulting, Weston, Mass 02493 "An empty zombie mind with a forlorn barely readable weatherbeaten 'For Rent' sign still vainly flapping outside on the weed encrusted pole - in celebration of what could have been, but wasn't and is not to be now either." ______________________________________________

Top surface has a few scratches and dings but is entirely serviceable. $150 OBO Light Table: 4'long x 3'3"wide. Stands on 4' pedestals. Heavy wood construction with plexiglass top covering 4 fluorescent bulbs. Four or five settings rotating top from horizontal to vertical. $100 OBO Layout Table: 93"long x 33"wide x 30"tall.

When I replaced the fuel tanks 18 months ago, I had the mfg put a 1/4" fitting at the bottom of the tank and a 1/4" fitting at the top. After the tanks were in place, I installed a 90 deg fitting after the shutoff on the bottom and top fitting. I then put 1/4" clear plastic water line between the two fittings.

You crack the tap on the tank side and simply watch for the fuel level to get to the top of the filter cylinder. Replace the top and you are done. No air, no bleed, no separate tank of top-up diesel, and little mess. Return all taps to normal operating position, final check for leaks, and you are off.

A 1 x 2 inch piece base under a 1 x1 pivoting top each 3 inches long. The top piece has a green flat topped dowel on one side and a red pencil sharpened dowel on the other side, each about 1 inch tall. The positions can be changed by rotating the top or turning the whole assembly 180 degrees.

In these, the shade material is fastened to the window frame or just above only at the top...like an angled sunshade. The bottom edge typically extends out to a lower height. On my salon side windows, for example, the tops are button fastened just above my window tops, the lower edge buttons to my handrails.

H2B2428DA There is a second deck pilothouse and a mast with radar, TV antenna of standoff platforms and met package on the top. There is a small spreader. On either side of the pilothouse at rear are two tall antennas for VHF and SSB. There is a ladder handrail that goes to the top of the pilothouse that sticks up about 2 feet.