Nick, Excellent analysis of the snubber issue. I agree with CaptnWil's comments. I have a couple of suggestions on how to achieve the elastic properties in a short length: 1. Use kermantle climbing rope (dynamic, NOT static). It is engineered specifically for for maximum energy absorption. 2. A parallel snubber scheme can deliver high elasticity at low load, while still performing when the loads have gone into the storm anchoring range. E.g., shorter snubber of 6mm kermantle, longer snubber of 10mm kermantle or 3/8" 3-strand. 3. An interesting option is the Hazelett Snubber. Bill developed for mooring applications, but should work just as well on the hook. I haven't had a chance to evaluate yet (Wil are you listening? ), but the elasticity curves are remarkable. A special polyurethane developed with Globe Rubber. Bill is at hazellet@hazellet.com in Colchester, Vermont ph 802/863-6376. 4. Industrial shock cord has also been suggested. Haven't looked into this option. Cheers, Steve ----------------- Stephen C. Darden Adagio Marine Ltd.

Peter and All, Two of my boats have had Force 10 stoves. I am definitely not a cook, other than for survival purposes, so I have never used them. I do good with the microwave.... However, my wife is an excellent cook and has never had a problem with either of the Force 10s.

Januar 2013 19:55 > An: Discussion of precise time and frequency measurement > Betreff: [time-nuts] 10 MHz -> 16 MHz clock multiplier > > > What's the simplest way to generate 16 MHz from 10 MHz? This > will be for clocking a microcontroller at 16 MHz given 10 MHz > (Cs/Rb/GPSDO).

. ________________________________ Featured Events for 10/05-10/09 [virtualplaylearn] Virtual Play to

. ________________________________ Featured Events for 10/05-10/09 [virtualplaylearn] Virtual Play to

; 3 were seen at Island View Park on Feb. 13 *TURKEY VULTURE* – 1 bird was seen at 3545 Harrowsmith Road on Feb. 10; 1 was seen on Amherst Island on Feb. 10; 1 was seen on Hwy. 33 near Finkle’s Shore Park on Feb. 10; 1 was seen at Treasure Island Marina on Feb. 11 GOLDEN EAGLE – 1 bird was seen at South Shore Road near Hay Bay on Feb. 10; 1 was seen

It appears to be tuned to a somewhat lower frequency than 10 MHz, perhaps 10 KHz to 1 MHz where the overall gain is near 0 dB, and the phase shift is near 0. I am using MMBT3904 transistors with Ft near 250 MHz.

>Thanks > > > >On 4/01/2013 5:13 AM, Bill Fuqua wrote: >> One way is to divide by 10 and then multiply by 16. >> Divide by 10 and then follow by 4 tuned frequency doublers. >> This should introduce little phase noise. >> Another way to do it is to divide by 10, then pass the output thru a >> narrow 16 MHz filter and amplify.

I ran a program for 2 hours in which I called both sensors every 10 seconds in the presence of a good GPS signal. I also verified that the jumper was set correctly when the GPSDO module was installed. Any other ideas? Thanks, Sean

It would be good to learn which antennas are 10 Volt types. For example is the Trimble 4000ST L1 Geodetic, Model 14177-00 a 10 Volt antenna? http://www.prc68.com/I/Trimpack.shtml#4000STant -- Have Fun, Brooke Clarke http://www.prc68.com