time-nuts@lists.febo.com

Discussion of precise time and frequency measurement

View all threads

WTB: 10 Volt L1 & L2 GPS Antenna

BC
Brooke Clarke
Thu, May 21, 2009 1:54 AM

Hi:

I just got an Ashtech Z-12-R Reference Station and it needs the subject
antenna.
http://www.prc68.com/I/AshtechZ12.shtml

I've got a bunch of GPS antennas but none with the needed combination of
features.  It would be good to learn which antennas are 10 Volt types.
For example is the Trimble 4000ST L1 Geodetic, Model 14177-00 a 10 Volt
antenna?
http://www.prc68.com/I/Trimpack.shtml#4000STant

--
Have Fun,

Brooke Clarke
http://www.prc68.com

Hi: I just got an Ashtech Z-12-R Reference Station and it needs the subject antenna. http://www.prc68.com/I/AshtechZ12.shtml I've got a bunch of GPS antennas but none with the needed combination of features. It would be good to learn which antennas are 10 Volt types. For example is the Trimble 4000ST L1 Geodetic, Model 14177-00 a 10 Volt antenna? http://www.prc68.com/I/Trimpack.shtml#4000STant -- Have Fun, Brooke Clarke http://www.prc68.com
GL
Glenn Little WB4UIV
Thu, May 21, 2009 3:49 AM

You could put a regulator on the voltage line for the antenna so that
you could use a 5 Volt antenna.

This would get you away from the specific voltage requirements for
their antenna.

73
Glenn
WB4UIV

At 09:54 PM 5/20/2009, you wrote:

Hi:

I just got an Ashtech Z-12-R Reference Station and it needs the
subject antenna. http://www.prc68.com/I/AshtechZ12.shtml

I've got a bunch of GPS antennas but none with the needed
combination of features.  It would be good to learn which antennas
are 10 Volt types.
For example is the Trimble 4000ST L1 Geodetic, Model 14177-00 a 10
Volt antenna?
http://www.prc68.com/I/Trimpack.shtml#4000STant

--
Have Fun,

Brooke Clarke
http://www.prc68.com


time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.

You could put a regulator on the voltage line for the antenna so that you could use a 5 Volt antenna. This would get you away from the specific voltage requirements for their antenna. 73 Glenn WB4UIV At 09:54 PM 5/20/2009, you wrote: >Hi: > >I just got an Ashtech Z-12-R Reference Station and it needs the >subject antenna. http://www.prc68.com/I/AshtechZ12.shtml > >I've got a bunch of GPS antennas but none with the needed >combination of features. It would be good to learn which antennas >are 10 Volt types. >For example is the Trimble 4000ST L1 Geodetic, Model 14177-00 a 10 >Volt antenna? >http://www.prc68.com/I/Trimpack.shtml#4000STant > >-- >Have Fun, > >Brooke Clarke >http://www.prc68.com > > >_______________________________________________ >time-nuts mailing list -- time-nuts@febo.com >To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts >and follow the instructions there.
BC
Brooke Clarke
Thu, May 21, 2009 5:08 AM

Hi Glenn:

Yes, I've thought about doing that, but then priced a small Pomona box
at $50 and thought just getting the proper antenna would be easier and
not that much more money.

Have Fun,

Brooke Clarke
http://www.prc68.com

Glenn Little WB4UIV wrote:

You could put a regulator on the voltage line for the antenna so that
you could use a 5 Volt antenna.

This would get you away from the specific voltage requirements for
their antenna.

73
Glenn
WB4UIV

At 09:54 PM 5/20/2009, you wrote:

Hi:

I just got an Ashtech Z-12-R Reference Station and it needs the
subject antenna. http://www.prc68.com/I/AshtechZ12.shtml

I've got a bunch of GPS antennas but none with the needed combination
of features.  It would be good to learn which antennas are 10 Volt
types.
For example is the Trimble 4000ST L1 Geodetic, Model 14177-00 a 10
Volt antenna?
http://www.prc68.com/I/Trimpack.shtml#4000STant

--
Have Fun,

Brooke Clarke
http://www.prc68.com


time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to
https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.

Hi Glenn: Yes, I've thought about doing that, but then priced a small Pomona box at $50 and thought just getting the proper antenna would be easier and not that much more money. Have Fun, Brooke Clarke http://www.prc68.com Glenn Little WB4UIV wrote: > You could put a regulator on the voltage line for the antenna so that > you could use a 5 Volt antenna. > > This would get you away from the specific voltage requirements for > their antenna. > > 73 > Glenn > WB4UIV > > At 09:54 PM 5/20/2009, you wrote: >> Hi: >> >> I just got an Ashtech Z-12-R Reference Station and it needs the >> subject antenna. http://www.prc68.com/I/AshtechZ12.shtml >> >> I've got a bunch of GPS antennas but none with the needed combination >> of features. It would be good to learn which antennas are 10 Volt >> types. >> For example is the Trimble 4000ST L1 Geodetic, Model 14177-00 a 10 >> Volt antenna? >> http://www.prc68.com/I/Trimpack.shtml#4000STant >> >> -- >> Have Fun, >> >> Brooke Clarke >> http://www.prc68.com >> >> >> _______________________________________________ >> time-nuts mailing list -- time-nuts@febo.com >> To unsubscribe, go to >> https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts >> and follow the instructions there. >
B
bg@lysator.liu.se
Thu, May 21, 2009 7:41 AM

Hi Brooke,

Check  Ebay # 270386792376 &  #200243560108

They are probably dual frequency splitters. Then you connect your Z12 to a
DC-block port and either just DC-power or a fitting GPS receiver to power
the antenna through the DC-through port.

http://gpsnetworking.com/GPS-antenna-splitters.asp
http://www.gpssource.com/mysql/splitters.php

Both GPS Source and GPS Networking splitters surface on Ebay from time to
time.

The HP/Agilent/Symmetricom line of splitters are L1-only.

--

Björn

Hi Glenn:

Yes, I've thought about doing that, but then priced a small Pomona box
at $50 and thought just getting the proper antenna would be easier and
not that much more money.

Have Fun,

Brooke Clarke
http://www.prc68.com

Glenn Little WB4UIV wrote:

You could put a regulator on the voltage line for the antenna so that
you could use a 5 Volt antenna.

This would get you away from the specific voltage requirements for
their antenna.

73
Glenn
WB4UIV

At 09:54 PM 5/20/2009, you wrote:

Hi:

I just got an Ashtech Z-12-R Reference Station and it needs the
subject antenna. http://www.prc68.com/I/AshtechZ12.shtml

I've got a bunch of GPS antennas but none with the needed combination
of features.  It would be good to learn which antennas are 10 Volt
types.
For example is the Trimble 4000ST L1 Geodetic, Model 14177-00 a 10
Volt antenna?
http://www.prc68.com/I/Trimpack.shtml#4000STant

--
Have Fun,

Brooke Clarke
http://www.prc68.com


time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to
https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.


time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to
https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.

Hi Brooke, Check Ebay # 270386792376 & #200243560108 They are probably dual frequency splitters. Then you connect your Z12 to a DC-block port and either just DC-power or a fitting GPS receiver to power the antenna through the DC-through port. http://gpsnetworking.com/GPS-antenna-splitters.asp http://www.gpssource.com/mysql/splitters.php Both GPS Source and GPS Networking splitters surface on Ebay from time to time. The HP/Agilent/Symmetricom line of splitters are L1-only. -- Björn > Hi Glenn: > > Yes, I've thought about doing that, but then priced a small Pomona box > at $50 and thought just getting the proper antenna would be easier and > not that much more money. > > Have Fun, > > Brooke Clarke > http://www.prc68.com > > > > Glenn Little WB4UIV wrote: >> You could put a regulator on the voltage line for the antenna so that >> you could use a 5 Volt antenna. >> >> This would get you away from the specific voltage requirements for >> their antenna. >> >> 73 >> Glenn >> WB4UIV >> >> At 09:54 PM 5/20/2009, you wrote: >>> Hi: >>> >>> I just got an Ashtech Z-12-R Reference Station and it needs the >>> subject antenna. http://www.prc68.com/I/AshtechZ12.shtml >>> >>> I've got a bunch of GPS antennas but none with the needed combination >>> of features. It would be good to learn which antennas are 10 Volt >>> types. >>> For example is the Trimble 4000ST L1 Geodetic, Model 14177-00 a 10 >>> Volt antenna? >>> http://www.prc68.com/I/Trimpack.shtml#4000STant >>> >>> -- >>> Have Fun, >>> >>> Brooke Clarke >>> http://www.prc68.com >>> >>> >>> _______________________________________________ >>> time-nuts mailing list -- time-nuts@febo.com >>> To unsubscribe, go to >>> https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts >>> and follow the instructions there. >> > > _______________________________________________ > time-nuts mailing list -- time-nuts@febo.com > To unsubscribe, go to > https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. >
BC
Brooke Clarke
Thu, May 21, 2009 2:06 PM

Thanks Björn:

I've got both of them on order and it's a way to start using the Z-12.  But my L1/L2 antennas are military patch types and for the Z-12 I'd like to use a geodetic grade (ground plane or choke ring) antenna long term.

Have Fun,

Brooke Clarke
http://www.prc68.com

bg@lysator.liu.se wrote:

Hi Brooke,

Check  Ebay # 270386792376 &  #200243560108

They are probably dual frequency splitters. Then you connect your Z12 to a
DC-block port and either just DC-power or a fitting GPS receiver to power
the antenna through the DC-through port.

http://gpsnetworking.com/GPS-antenna-splitters.asp
http://www.gpssource.com/mysql/splitters.php

Both GPS Source and GPS Networking splitters surface on Ebay from time to
time.

The HP/Agilent/Symmetricom line of splitters are L1-only.

--

Björn

Hi Glenn:

Yes, I've thought about doing that, but then priced a small Pomona box
at $50 and thought just getting the proper antenna would be easier and
not that much more money.

Have Fun,

Brooke Clarke
http://www.prc68.com

Glenn Little WB4UIV wrote:

You could put a regulator on the voltage line for the antenna so that
you could use a 5 Volt antenna.

This would get you away from the specific voltage requirements for
their antenna.

73
Glenn
WB4UIV

At 09:54 PM 5/20/2009, you wrote:

Hi:

I just got an Ashtech Z-12-R Reference Station and it needs the
subject antenna. http://www.prc68.com/I/AshtechZ12.shtml

I've got a bunch of GPS antennas but none with the needed combination
of features.  It would be good to learn which antennas are 10 Volt
types.
For example is the Trimble 4000ST L1 Geodetic, Model 14177-00 a 10
Volt antenna?
http://www.prc68.com/I/Trimpack.shtml#4000STant

--
Have Fun,

Brooke Clarke
http://www.prc68.com


time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to
https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.


time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to
https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.

Thanks Björn: I've got both of them on order and it's a way to start using the Z-12. But my L1/L2 antennas are military patch types and for the Z-12 I'd like to use a geodetic grade (ground plane or choke ring) antenna long term. Have Fun, Brooke Clarke http://www.prc68.com bg@lysator.liu.se wrote: > Hi Brooke, > > Check Ebay # 270386792376 & #200243560108 > > They are probably dual frequency splitters. Then you connect your Z12 to a > DC-block port and either just DC-power or a fitting GPS receiver to power > the antenna through the DC-through port. > > http://gpsnetworking.com/GPS-antenna-splitters.asp > http://www.gpssource.com/mysql/splitters.php > > Both GPS Source and GPS Networking splitters surface on Ebay from time to > time. > > The HP/Agilent/Symmetricom line of splitters are L1-only. > > -- > > Björn > >> Hi Glenn: >> >> Yes, I've thought about doing that, but then priced a small Pomona box >> at $50 and thought just getting the proper antenna would be easier and >> not that much more money. >> >> Have Fun, >> >> Brooke Clarke >> http://www.prc68.com >> >> >> >> Glenn Little WB4UIV wrote: >> >>> You could put a regulator on the voltage line for the antenna so that >>> you could use a 5 Volt antenna. >>> >>> This would get you away from the specific voltage requirements for >>> their antenna. >>> >>> 73 >>> Glenn >>> WB4UIV >>> >>> At 09:54 PM 5/20/2009, you wrote: >>> >>>> Hi: >>>> >>>> I just got an Ashtech Z-12-R Reference Station and it needs the >>>> subject antenna. http://www.prc68.com/I/AshtechZ12.shtml >>>> >>>> I've got a bunch of GPS antennas but none with the needed combination >>>> of features. It would be good to learn which antennas are 10 Volt >>>> types. >>>> For example is the Trimble 4000ST L1 Geodetic, Model 14177-00 a 10 >>>> Volt antenna? >>>> http://www.prc68.com/I/Trimpack.shtml#4000STant >>>> >>>> -- >>>> Have Fun, >>>> >>>> Brooke Clarke >>>> http://www.prc68.com >>>> >>>> >>>> _______________________________________________ >>>> time-nuts mailing list -- time-nuts@febo.com >>>> To unsubscribe, go to >>>> https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts >>>> and follow the instructions there. >>>> >> _______________________________________________ >> time-nuts mailing list -- time-nuts@febo.com >> To unsubscribe, go to >> https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts >> and follow the instructions there. >> >> > > >