If you have a 500 ohm to 50 ohm L pad on the gate, it should not draw much current at all to drive the load. I think that keeping the level as low as possible is a good idea RF wise. You don't want leakage of the local signal masking the real WWVB.

The Easy poxy does give a decent finish, but not quite as good as a well sprayed two part LP, such as Awlgrip. The Easypoxy will probably be good for 2 to 4 years and the Awlgrip up to 10 or more years--since the biggest "cost" is the prep, it pays to go with the top quality paint. Two part LP's can also be brushed, with a brushing reducer.

Mar 2018, at 5:29 PM, Tanstaafl wrote: > > Top-posting because you did... > > My concern is duplication of effort... > > Since the P=P team is working fully integrating PGP/Enigmail and making > it very easy (or at least much easier) for the average person to use, it > only makes sense (in my mind) to coordinate with them, maybe

I cover that in some detail My experience shows that cutting into the deck would not have done any good at all. Infact I removed a number of feet of teak and repaired the glass under it before I gained the experience of how leaks on decks work!!!!

Changing the roll of paper towels in the F-1 has always been easy for me. I just loosen the top, drain off the fuel inside with the drain valve, then remove the paper towel roll. There is a plate that screws onto the stem that you have to remove; it holds the paper towels in place. Other than that, the paper towels just slide right out.

> If you want pure verilog simulation, you can make a custom top level block, and use a tool like icarus to compile the simulation files. The files in the fpga tree that end in _top.v are all mini-simulations for various parts of the code. Use them as examples for a simulation top-block.

Bob >________________________________ > From: Tom Van Baak >To: Discussion of precise time and frequency measurement >Sent: Wednesday, February 26, 2014 11:22 PM >Subject: Re: [time-nuts] GPSDO with all-digital phase/time measurement?

Primecell rebuilds almost any kind of battery pack and has a very extensive list of applications on their website at primecell.com. Not all are NiCd to NiMH conversions. They are not (very) good at communications, as I sent several emails to ascertain the status and shipping date, and did not receive any replies.

Make it true OOP and easy to code 2. easy objects alignment in 3D On 11/9/19, Hans L wrote: > On Sat, Nov 9, 2019 at 10:33 PM John Lussmyer > wrote: >> What I would like is the editor to be syntax aware > > In what way? Syntax highlighting has been in for a while.

Aber es wäre möglich, >>> dass ich zum Beispiel mit Magnus zusammen und vielleicht der Hilfe von >>> ein paar anderen time-nuts und/oder Enrico etwas auf die Beine stellen >>> könnte. >>> >>> Was wären denn die Dinge, welche für dich, in ein Update rein müssten?