--:Listmeister Georgs >From: overboard@obdesigns.com >To: webmaster@trawlerworld.com >Subject: Boating Link > >I designed this website for boaters on the Chesapeake Bay but have >included information relevant to all areas.

I would need to add either a fiberglass or soft top over the aft sundeck. Does anyone have any experience with this or know of any boatyards in the New Orleans/Florida Panhandle area that can do this? J. Clint Cheveallier

Captain Al Pilvinis "M/V Driftwood"--Prairie 47 2630 N.E. 41st Street Lighthouse Point, Fl 33064-8064 Voice 954-941-2556 Fax 954 788-2666 Email yourcaptain@earthlink.net Website http://home.earthlink.net/~yourcaptain

I was concerned about adding weight up top where it causes the most problem. I wound up with two aluminum tops made from tube. You can get them to cover them with fabric or what I did which was a thin fiberglass cover that looks better than the fabric. The top is only 1/8" thick and is gel coated. This is the guy that made and installed them.

. > > Didier > >> -----Original Message----- >> From: time-nuts-bounces@febo.com >> [mailto:time-nuts-bounces@febo.com] On Behalf Of Chuck Harris >> Sent: Tuesday, July 07, 2009 9:33 AM >> To: Discussion of precise time and frequency measurement >> Subject: Re: [time-nuts] 1" 14 tpi UNS die >> >> Hi Dave, >> >> That would 3/4 inch NPT (National Pipe Thread

Sometime ago someone posted information on setting up a free Blog or Website. I saved it, but can't seem to find it now that I want to set one up for my Great Loop Trip. Would that person please contact me direct. This old guy needs all the help he can get. James Taylor #2825 42' MV Arundel Kemah, TX thesirenia@earthlink.net Verizon (281) 615-6476

Texas A&M University News June 24, 2011 Texas A&M Biologists Honored As Top Texas Inventors Of 2011top-texas-inventors-of-2011/> Texas A&M University biologists Dr. Richard Gomer and Dr.

Alabama State University News January 27, 2012 Top Experts to Speak at ASU's HBCU Conference Some of the nation's top experts will deliver keynote addresses during Alabama State University's upcoming HBCU Entrepreneurship Conference.

I was concerned about adding weight up top where it causes the most problem. I wound up with two aluminum tops made from tube. You can get them to cover them with fabric or what I did which was a thin fiberglass cover that looks better than the fabric. The top is only 1/8" thick and is gel coated. This is the guy that made and installed them.

This is our website, and should reflect our club, it's members and it’s sponsors as best it can. Best Regards, Eric Tauer President Salida Cycling Club 719.539.3215 salidacyclingclub.com