They read like a dream but it doesn't really sound very practical in the real world.....sorry Mike ;-) As an aside the current clearing in form in Antigua has a question as to what countries you have visited in the last 6 weeks.

sorry about earlier command, here is my command for uhd_rx_cfile: uhd_rx_cfile --args="fpga=usrp1_fpga_4rx.rbf" -f "$FC" --samp-rate="$SR" $FILE -N "$NSAMPLES" On Thu, Oct 2, 2014 at 9:16 AM, gsmandvoip wrote: > Yes I am running single channel, but when trying to achieve my desired > sampling rate without _4rx.rbf, it says, requested

If you dig into the FCS papers there are various curves proposed as models. Mil-O-55310 has one of them as the “official” approach. All of them have the basic issue of mistakenly fitting to to short a time constraint.

Of course, 10 seconds in that water will convince just about any sane person to get out, fast. David Sorenson Duluth, MN

PROCTOR ARTS FEST, SIDEWALK SALE, AND FOOD DRIVE promises to be a fun-filled family event AUGUST 6 and 7, 2010 SIDEWALK SALE - all businesses FRIDAY, AUGUST 6 and SATURDAY, AUGUST 7 10 AM – 6 PM PROCTOR ARTS FEST – Street fair along N. 26th and Proctor SATURDAY, AUGUST 7 10 AM – 6 PM FOOD DRIVE - Safeway Parking Lot; N. 25th and Proctor SATURDAY

. > >> > >> The wired port will receive a tone at fc + 10khz. The antenna > port will receive a tone at fc + 100khz. > >> Hence, both are within the 40MHz bandwidth of the SBX. > >> > >> Thanks!

What's a clever, simple, reliable (pick 2 of 3) way to get 16 MHz out of 10 MHz? Low phase noise isn't a big requirement and jitter doesn't need to be sub-nanosecond. The main requirement is perfect cycle count accuracy. This is for driving a 16 MHz microcontroller from a 10 MHz Rb/Cs/GPSDO. 10 MHz input is likely sine; 16 MHz output is 3v3 or 5v CMOS.

Our Wednesday afternoon hike will visit the Blenheim Sewage Lagoons. Birders are reminded that a permit is required should they wish to visit on their own - available from the Visitor Centre or online from Chatham - Kent Offices. Your cooperation will ensure that we birders continue to have access to the lagoons.

>>> same spec. values as reliability, mating numbers, contact power rating etc. >>> It is up to the designer of a product to be informed and select the >>> right quality device for his product ... >>> >>> I hope I could enlight a bit the connector selection and nomenclature point. >>> >>> regards, 73 >>> >>> Arnold, DK2WT >>> >>> >>> >>> Am 22.06.2017 um 21:10

Even using these other fabs leaves almost 50 mil short of the > original A4 thickness. Maybe the connector can make up the 50 mil > shortfall? If this is just a 2-sided board, you could split the layers onto > two circuit boards with thicknesses that come close to the original A4 > board.