As always, a big thank you goes to all those who have submitted sightings directly or via eBird. Darren Darren Rayner Perth Road, Ontario Email: birds@kingstonfieldnaturalists.org

10/26 - New Milford - new (to me) vulture roost - 50-60 assorted - light was too poor to do a decent count but mostly Turkey with a lot of Blacks in a tall leafless tree plus a couple of tall spruces at the top of Aspetuck Avenue off the top of the Green. The birds flying around were all Black Vultures. Canterbury students beware! Angela Dimmitt

The parts are pretty common, so it’s a fairly easy fix. 3) Alignment. This takes a while, but these beasts do drift. No I’m not suggesting that you buy every single 5370 based on it being an “easy fix”. I would indeed check 1 and 2 above on any 5370 that comes in.

I think my tickets set but who's all goin tonight? What's the plan? Daniel Rosenfield Danielarosenfield@yahoo.com (650) 279-9408 > On Aug 11, 2014, at 2:32 PM, axischiro via Rhino wrote: > > I have an extra ticket for the VIP bus to Top Gun at Red Rocks tonight if somebody wants it.

We would very much like to take a first hand look at a Sundowner 30/32 or a Nordic Tugs 26. We are in the Cleveland area, but are willing to do some driving. Ken

On a Marine Trader 36 sundeck model, the flybridge rests on the cabin top. The joint is concealed behind teak molding strips about 2" wide. Is there supposed to be caulking in the joint between the flybridge and the cabin top? I don't see any purpose for it but ??? Bob Siegel Annapolis

All I have to do is figure out which square pin goes to which tube pin - easy since it's wide open.

Lap Top Experience? Our Toshiba is off for repairs, plus is normally used for many applications, which could conflict with nav programs, so.....looking for a stand alone nav lap top......... Would like daylight viewable, modest weather proof and ruggedness (Ithink?).......

Although over the years the non-conductive top has been an > asset in > avoiding short circuits, etc., I am concerned about static discharges when > handling modern semiconductors.

I can still get the filters out the top (I did remember to plan for that!!!) and now have room to get a can in underneath for easy draining. I removed the original brass drains and replaced them with plastic twist type wheeels from RACOR. Very easy to control and easy working.