5061A AC Power connector
What is the MS type for the power plug for a 5061A ?
I could not find it in the PDF I have.
-pete
Pete,
In the US, Galco sells a DDK product that works well. The connector and
shell are a DMS3106A18-22S.
http://www.galco.com/buy/DDK/DMS3106A18-22S
You will also need a clamp and strain relief. I use a DMS3057-10A.
http://www.galco.com/buy/DDK/DMS3057-10A
It is the same connector as a 5065A though you have to be careful about the
wiring. Some of the 5065A's are the same as the 5061A and others are
different.
Hope this helps.
Joe
-----Original Message-----
From: time-nuts-bounces@febo.com [mailto:time-nuts-bounces@febo.com] On
Behalf Of Pete Lancashire
Sent: Saturday, November 24, 2012 6:51 PM
To: Discussion of precise time and frequency measurement
Subject: [time-nuts] 5061A AC Power connector
What is the MS type for the power plug for a 5061A ?
I could not find it in the PDF I have.
-pete
time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to
https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
I hoped it helped also. I know it did for me. Will order 2 sets so I can
finally have real connectors on the 5061 and 5065. I wonder if its the same
for the standby power supply may need to order 3.
Regards
Paul
WB8TSL
On Sat, Nov 24, 2012 at 9:35 PM, J. L. Trantham jltran@att.net wrote:
Pete,
In the US, Galco sells a DDK product that works well. The connector and
shell are a DMS3106A18-22S.
http://www.galco.com/buy/DDK/DMS3106A18-22S
You will also need a clamp and strain relief. I use a DMS3057-10A.
http://www.galco.com/buy/DDK/DMS3057-10A
It is the same connector as a 5065A though you have to be careful about the
wiring. Some of the 5065A's are the same as the 5061A and others are
different.
Hope this helps.
Joe
-----Original Message-----
From: time-nuts-bounces@febo.com [mailto:time-nuts-bounces@febo.com] On
Behalf Of Pete Lancashire
Sent: Saturday, November 24, 2012 6:51 PM
To: Discussion of precise time and frequency measurement
Subject: [time-nuts] 5061A AC Power connector
What is the MS type for the power plug for a 5061A ?
I could not find it in the PDF I have.
-pete
time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to
https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to
https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
http://www.leapsecond.com/museum/hp5065a/conn.htm
/tvb (iPhone4)
On Nov 24, 2012, at 4:50 PM, Pete Lancashire pete@petelancashire.com wrote:
What is the MS type for the power plug for a 5061A ?
I could not find it in the PDF I have.
-pete
time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
Paul,
According to the 5089 manual, the power connector is the same. Both the
5085 and 5089 call for the same HP part number for the AC power cord.
Therefore, I suspect they are the same.
I have a 5085 hooked up and I can make sure tomorrow if you need it.
Joe
-----Original Message-----
From: time-nuts-bounces@febo.com [mailto:time-nuts-bounces@febo.com] On
Behalf Of paul swed
Sent: Saturday, November 24, 2012 9:06 PM
To: Discussion of precise time and frequency measurement
Subject: Re: [time-nuts] 5061A AC Power connector
I hoped it helped also. I know it did for me. Will order 2 sets so I can
finally have real connectors on the 5061 and 5065. I wonder if its the same
for the standby power supply may need to order 3. Regards Paul WB8TSL
On Sat, Nov 24, 2012 at 9:35 PM, J. L. Trantham jltran@att.net wrote:
Pete,
In the US, Galco sells a DDK product that works well. The connector
and shell are a DMS3106A18-22S.
http://www.galco.com/buy/DDK/DMS3106A18-22S
You will also need a clamp and strain relief. I use a DMS3057-10A.
http://www.galco.com/buy/DDK/DMS3057-10A
It is the same connector as a 5065A though you have to be careful
about the wiring. Some of the 5065A's are the same as the 5061A and
others are different.
Hope this helps.
Joe
-----Original Message-----
From: time-nuts-bounces@febo.com [mailto:time-nuts-bounces@febo.com]
On Behalf Of Pete Lancashire
Sent: Saturday, November 24, 2012 6:51 PM
To: Discussion of precise time and frequency measurement
Subject: [time-nuts] 5061A AC Power connector
What is the MS type for the power plug for a 5061A ?
I could not find it in the PDF I have.
-pete
time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to
https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to
https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to
https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
18-22S is what I needed, now to go into the depths of the garaged and
find the box of MS connectors.
-pete
On Sat, Nov 24, 2012 at 6:35 PM, J. L. Trantham jltran@att.net wrote:
Pete,
In the US, Galco sells a DDK product that works well. The connector and
shell are a DMS3106A18-22S.
http://www.galco.com/buy/DDK/DMS3106A18-22S
You will also need a clamp and strain relief. I use a DMS3057-10A.
http://www.galco.com/buy/DDK/DMS3057-10A
It is the same connector as a 5065A though you have to be careful about the
wiring. Some of the 5065A's are the same as the 5061A and others are
different.
Hope this helps.
Joe
-----Original Message-----
From: time-nuts-bounces@febo.com [mailto:time-nuts-bounces@febo.com] On
Behalf Of Pete Lancashire
Sent: Saturday, November 24, 2012 6:51 PM
To: Discussion of precise time and frequency measurement
Subject: [time-nuts] 5061A AC Power connector
What is the MS type for the power plug for a 5061A ?
I could not find it in the PDF I have.
-pete
time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to
https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
I've had a few emails on what I meant by just needing the 18-22S. The
series of connectors
this on is from came out in WW2 to attempt to standardize on
connectors. One feature is the
outer shell and the inner insulated center are interchangeable.
This glossy gives a pretty good overview and how its done
http://www.ittcannon.com/uploadedFiles/Product_PDFs/MS%20A&B%20Catalog.pdf
-pete
On Sat, Nov 24, 2012 at 7:40 PM, Pete Lancashire
pete@petelancashire.com wrote:
18-22S is what I needed, now to go into the depths of the garaged and
find the box of MS connectors.
-pete
On Sat, Nov 24, 2012 at 6:35 PM, J. L. Trantham jltran@att.net wrote:
Pete,
In the US, Galco sells a DDK product that works well. The connector and
shell are a DMS3106A18-22S.
http://www.galco.com/buy/DDK/DMS3106A18-22S
You will also need a clamp and strain relief. I use a DMS3057-10A.
http://www.galco.com/buy/DDK/DMS3057-10A
It is the same connector as a 5065A though you have to be careful about the
wiring. Some of the 5065A's are the same as the 5061A and others are
different.
Hope this helps.
Joe
-----Original Message-----
From: time-nuts-bounces@febo.com [mailto:time-nuts-bounces@febo.com] On
Behalf Of Pete Lancashire
Sent: Saturday, November 24, 2012 6:51 PM
To: Discussion of precise time and frequency measurement
Subject: [time-nuts] 5061A AC Power connector
What is the MS type for the power plug for a 5061A ?
I could not find it in the PDF I have.
-pete
time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to
https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
Forgot to mention, when you get the DMS3106A18-22S, you'll have to unscrew
the back, remove the connector insert, file out a small 'key' in the
material, and rotate the insert to achieve the desired alignment to mate
with the connector on the 5061A or the 5065A. The alignment is the same on
both but the wiring might be different.
Joe
-----Original Message-----
From: time-nuts-bounces@febo.com [mailto:time-nuts-bounces@febo.com] On
Behalf Of J. L. Trantham
Sent: Saturday, November 24, 2012 8:36 PM
To: 'Discussion of precise time and frequency measurement'
Subject: Re: [time-nuts] 5061A AC Power connector
Pete,
In the US, Galco sells a DDK product that works well. The connector and
shell are a DMS3106A18-22S.
http://www.galco.com/buy/DDK/DMS3106A18-22S
You will also need a clamp and strain relief. I use a DMS3057-10A.
http://www.galco.com/buy/DDK/DMS3057-10A
It is the same connector as a 5065A though you have to be careful about the
wiring. Some of the 5065A's are the same as the 5061A and others are
different.
Hope this helps.
Joe
-----Original Message-----
From: time-nuts-bounces@febo.com [mailto:time-nuts-bounces@febo.com] On
Behalf Of Pete Lancashire
Sent: Saturday, November 24, 2012 6:51 PM
To: Discussion of precise time and frequency measurement
Subject: [time-nuts] 5061A AC Power connector
What is the MS type for the power plug for a 5061A ?
I could not find it in the PDF I have.
-pete
time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to
https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to
https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
Unfortunately, my junk box is not so well stocked with MS connectors. The
DDK units are much cheaper than the Cannon connectors.
Joe
-----Original Message-----
From: time-nuts-bounces@febo.com [mailto:time-nuts-bounces@febo.com] On
Behalf Of Pete Lancashire
Sent: Saturday, November 24, 2012 9:45 PM
To: Discussion of precise time and frequency measurement
Subject: Re: [time-nuts] 5061A AC Power connector
I've had a few emails on what I meant by just needing the 18-22S. The series
of connectors this on is from came out in WW2 to attempt to standardize on
connectors. One feature is the outer shell and the inner insulated center
are interchangeable.
This glossy gives a pretty good overview and how its done
http://www.ittcannon.com/uploadedFiles/Product_PDFs/MS%20A&B%20Catalog.pdf
-pete
On Sat, Nov 24, 2012 at 7:40 PM, Pete Lancashire pete@petelancashire.com
wrote:
18-22S is what I needed, now to go into the depths of the garaged and
find the box of MS connectors.
-pete
On Sat, Nov 24, 2012 at 6:35 PM, J. L. Trantham jltran@att.net
wrote:
Pete,
In the US, Galco sells a DDK product that works well. The connector
and shell are a DMS3106A18-22S.
http://www.galco.com/buy/DDK/DMS3106A18-22S
You will also need a clamp and strain relief. I use a DMS3057-10A.
http://www.galco.com/buy/DDK/DMS3057-10A
It is the same connector as a 5065A though you have to be careful
about the wiring. Some of the 5065A's are the same as the 5061A and
others are different.
Hope this helps.
Joe
-----Original Message-----
From: time-nuts-bounces@febo.com [mailto:time-nuts-bounces@febo.com]
On Behalf Of Pete Lancashire
Sent: Saturday, November 24, 2012 6:51 PM
To: Discussion of precise time and frequency measurement
Subject: [time-nuts] 5061A AC Power connector
What is the MS type for the power plug for a 5061A ?
I could not find it in the PDF I have.
-pete
time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to
https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to
https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to
https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
On Sat, Nov 24, 2012 at 08:35:44PM -0600, J. L. Trantham wrote:
Pete,
In the US, Galco sells a DDK product that works well. The connector and
shell are a DMS3106A18-22S.
http://www.galco.com/buy/DDK/DMS3106A18-22S
You will also need a clamp and strain relief. I use a DMS3057-10A.
Thanks, one less living in sin thing in my life...
An official connector !
--
Dave Emery N1PRE/AE, die@dieconsulting.com DIE Consulting, Weston, Mass 02493
"An empty zombie mind with a forlorn barely readable weatherbeaten
'For Rent' sign still vainly flapping outside on the weed encrusted pole - in
celebration of what could have been, but wasn't and is not to be now either."