On 31 August 2018 at 05:49, FourthDr wrote: > I was trying to make a coin for a friend to 3D print with a bossing on > top. I > noticed that the coin or solid cylinder has a rough hexagonal shape to it. > How do I get a smooth round texture instead of the hex looking couture?

Bob > On Mar 6, 2018, at 11:22 PM, Mark Sims wrote: > > Probably 20+ years for a lithium coin cell... basically the shelf life of the cell.

For more information and how to apply, please visit http://socialmedialab.ca/visit/ -- Anatoliy Gruzd, PhD Canada Research Chair in Social Media Data Stewardship Associate Professor, Ted Rogers School of Management Director, Social Media Lab Ryerson University Mailing Address: 350 Victoria Street, Toronto, Ontario, Canada M5B 2K3 Office: TRS

Al Sinclair The Sinclairs Visit http://www.ofo.ca/ontbirdsguide.htm for information on leaving and joining the list. As well as general information and content guidelines.

Tracing the circuits is also made more difficult because of > the >> use >> of mil parts and mil nomenclature. I have most cross correlated and I am >> down to one PMI part 38510/11201BCA.

Civil Rights Pilgrimage visited the Alabama State University campus on Sunday, March 5.

.: usrp_source https://www.gnuradio.org/doc/doxygen-3.7.2/classgr_1_1uhd_1_1usrp__source.html ) > > > > My dilemma is that I need to set the center frequency of the TX to "fc" and the center frequency of the RX to "2*fc" and its phase relationship should be identical for each "fc" (at least as long the USRP does not power cycle). > > > > The gnuradio API als

For subscription information visit http://lists.ctbirding.org/mailman/listinfo/ctbirds_lists.ctbirding.org

Henderson, MILS, AHIP Executive Director Louis Stokes Health Sciences Library Howard University 501 W Street, NW Washington, DC 20059 cynthia.henderson@howard.edu 202.884.1723 voice 202.884.1733 fax http://hsl.howard.edu/

Trawler on, John PS....the more common hydraulic fluid on transport category aircraft is a Mil Spec 5606 which is not flammable but it is corrosive to skin and probably seals that aren't compatible. I do think that there are smaller aircraft that use the flammable type.