It appears that the problem is that there is >> a file top/n3xx/Makefile.srcs that is clearing the RFNOC_OOT_SRCS variable >> after it is set in the users OOT makefile. I just commented the line in >> top/n3xx/Makefile.srcs and that seems to do the trick. Is this a known >> issue?

Ok, however, anyone know how to move the toolbar from the bottom of the screen up to the top? The older version the ToolBar was located across the top, and I've become quite accustomed to using OpenSCAD that way, and alot of my other tools work that way as well. I've poked around in the Preferences dialogs, but I don't really see anything related.

News & World Report top-ranked HBCU Albany State University (ASU) was recently ranked among the nation's top Historically Black Colleges and Universities and the #1 public HBCU in the state of Georgia, according to U.S. News & World Report's 2018 list of top ranked colleges and universities. ASU made the cut at #14 among all public HBCUs in the nation.

The nostalgia affect peaks and dies as the old folks > die. On top of that, time is an esoteric field. Put something up > on eBay and you'll be very lucky to get 100 people looking at it. > > So do your loved ones (if that fits) and the next generation of > time-nuts a favor and disperse your collection.

Hi fine friends of Thunderbird and people with fast processors, SSDs and at least 4 GB of RAM ;-) If you want to continue compiling your favourite application locally, please consider switching to "M-C as top source directory".

. ________________________________________ From: time-nuts-bounces@febo.com [time-nuts-bounces@febo.com] On Behalf Of Jim Lux [jimlux@earthlink.net] Sent: Thursday, December 29, 2011 5:16 PM To: Discussion of precise time and frequency measurement Subject: [time-nuts] line frequency website Check it out: http://fnetpublic.utk.edu/tabledisplay.html line frequency

New website finally up. Google search: "Pairadoxproperties.com".

on top of the faces of the cube and frustum, for which I have to calculate the frustum angle to rotate the extruded character: xAxisRotation = atan(frustumHeight / ((cubeSideLength-frustumTopWidth)/2)); (The translucent stuff is a cavity on the inside.)

Take a look at the website.

After my what would have been top five, the East Hartford Avocets had a place somewhere in my ten. It may have been Mark Szantyr's photos and the "inland buzz" that put them there. Anyway, these votes and input didn't count towards the tally. Again, thanks Frank for taking the initiative and time for doing this.