. >>> >>> I need a 10 MHz Band-Pass Filter, Bandwidth is not critical, something >>> small with SMA connectors would be ideal, but I can live with BNC. >>> >>> Anyone have such a beast or know where I can get one ? I checked Mini-Circuits >>> and choked on the price !! >>> >>> >>> >> Dick, it is really easy to build one. The wonderful (free!)

Bob On Feb 12, 2010, at 11:32 AM, life speed wrote: > Message: 3 > Date: Thu, 11 Feb 2010 23:02:30 -0500 > From: Bob Camp > Subject: Re: [time-nuts] Advice on 10 MHz isolation/distribution > (Clay) > > Hi > > I suspect your noise spike can be cured by a series R-C to ground from the junction of Q1 base, Q7 base and all the other stuff.

From: Pete Rawson Subject: Re: [time-nuts] Advice on 10 MHz isolation/distribution To: Discussion of precise time and frequency measurement     Message-ID: <1027D446-FE23-45A7-88AD-1CFD339C4ABB@earthlink.net> Content-Type: text/plain; charset=us-ascii Clay, I would really like to have a copy of your test board

Luciano Paramithiotti wrote: > A simple low pass filter to cut second and third harmonics from a 5 or 10 > MHZ signal. > See the paper: > http://www.timeok.it/files/5_and_10mhz_low_pass_notch_filter.pdf > > Luciano Timeok It is easy to use filter software to design a filter like this, but how well it actually works is highly dependent on the quality of implementation

listertim@gmail.com said: > Connecting the 10 MHz output to the Channel A input (on the 5334B) or the > frequency input (on the 5370B) and setting 50 Ohm termination and AC signals > but without any other input or external reference results in a frequency > that is off by about 0.1-0.2 Hz.

Frank To: volt-nuts@febo.com Sent: Monday, November 13, 2017 2:16 PM Subject: [volt-nuts] Unable to zero 3420B on 10**5 sensitivity David, I've thought a bit further about this excessive offset  of at least 8µV.

We now have an application that requires a connection to a server > that only has 10 Gb (SFP+) ports. > > > > It is my understanding that the X4_200 FPGA image supports using the Port > 0 QSFP28 interface as 4x10GbE connections. > > > > My question is which cable assembly I need to purchase to accomplish this… > > > > There appear to be adapters that go from

The USRP X310 uses dual 10 Gigabit Ethernet SFP+ ports to support high-throughput data transfers between the host and FPGA. I plan to transmit and receive samples in parallel over these two SFP+ ports using a single RF transmit and receive chain.

On Aug 21, 2016 10:42 AM, "Craig McLauchlan" wrote: > The bird is still being seen > #400 > > Craig > > Sent from my iPhone have a nice day > > > On Aug 20, 2016, at 12:21 PM, Jean Iron wrote: > > > > Ron Pittaway, Glenn Coady, Howard Shapiro an I looking at it now. > > > > Sent from my iPhone > > > >> On Aug 20,

The suggested donation is $10 to help pay for the model fee. Please RSVP by emailing nathanyeager@gmail.com or through the facebook event at: https://www.facebook.com/events/469051779847138/ We look forward to meeting other local artists. Thanks, Nathan