Oh yes, all the electric lights were also hand made using trailer parts obtained from the local automotive supply store. The lamp casing was all wood. Only the actual socket and bulb were store bought. Brackets etc were fabricated by hand from sheet stock. cheers Arild

My customers all knew not to try to get in touch with me on a powder day! They all thought I hand-carved the signs, but I was a router jockey all the way, except for a bit of fine finishing with a die grinder and Dremel tool. My main carving technique was to use a 3/4" wide V-Groove bit on a fixed base router.

Hello all. We're transporting our boat (Krogen 42) from Houston to Port Everglades FL on the ICW. Great weather so far and good trip except for one maddening (and potentially dangerous) problem. We'll be running normally down the waterway at 7-8 kn, 2200-2400 RPM, when suddenly the engine will start surging and faltering and die.

In my own opinion...if a fair percentage of people can DIE doing an activity then it might be classed as inherently dangerous. So comparing the number of people dying while boating and the number of people boating I'd say boating falls into that category for me...so I take all precautions I reasonably can to reduce the risk.

Good morning all, On 10/10/2015 5:07 PM, Dr.

We welcome young birders of all abilities. For more information contact Tina at tinaATrenaissancestudios.com or at (203)-247-2660. If you are a young birder, or know a young birder - this is a not to be missed bird walk. Kathy Van Der Aue Southport, CT Southport, Connecticut Visit my Blog at http://naturaliststable.wordpress.com

From: Jordan Brown Sent: Thursday, June 1, 2023 3:16 PM To: OpenSCAD general discussion Mailing-list ; ken@volksswitch.org; 'Revar Desmera' Subject: Re: [OpenSCAD] Re: importing "all" of an SVG Do you know the dimensions of the SVG file, or might (e.g.) different users end up

HI, I've installed Vivado Design Suite-HLX Editions 2015.4 on Ubuntu 14.04 and succesfully setup the Ettus Xilinx build environment using source setupenv.sh But when i try to build binary bitstream using make GUI=1 all it ended up with the following errors INFO: [IP_Flow 19-1686] Generating 'Instantiation Template' target for IP 'ddr3_32bit'...

On Mon, Feb 13, 2017 at 3:38 AM, DEBADRITA DAS via USRP-users < usrp-users@lists.ettus.com> wrote: > HI, > I've installed Vivado Design Suite-HLX Editions 2015.4 on Ubuntu 14.04 and > succesfully setup the Ettus Xilinx build environment using > source setupenv.sh > But when i try to build binary bitstream using > make GUI=1 all > it ended up with the following

Here's a link to a new page on my website, with photos, parts list and instructions: http://www.tug44.org/winter.maintenance/antifreeze-flushing/ The pipe sizes I mention on the page are for the Groco ARG-750 (2" cap threads) sea-water strainer on my genny, but it's easy enough to select the correct sizes for other sizes of strainers.