There is currently a female Eastern Towhee visiting a feeder in a private yard in South Porcupine (10 km east of Timmins) The bird was found by Andrew Warren on December 8th and I was able to observe it today with fellow birder Pierre Noel.

Larry Flynn ----- Original Message ----- From: Tina and Peter Green via CTBirds Date: Tuesday, January 10, 2017 3:29 pm Subject: [CT Birds] Westport Ovenbird continues To: ct birds > I am happy to report the Ovenbird that has been visiting my yard > under the feeders survived the cold snap and appears to be doing > well.

Kathy Van Der Aue Southport, Connecticut Visit my Blog at http://naturaliststable.wordpress.com On Sun, Mar 25, 2018 at 10:40 PM, Frank Mantlik via CTBirds < ctbirds@lists.ctbirding.org> wrote: > Hi all. > I’m curious to hear of any reports on the Simsbury Varied Thrush today, > positive or negative.

information visit http://lists.ctbirding.org/mailman/listinfo/ctbirds_lists.ctbirding.org

7/30 Milford, Connecticut Audubon Coastal Center- 9:25am-10:20am- low tide, sunny, 88F. A brief visit this morning- active with campers and a school visit. At low tide on the marsh- many Semi-palmated sandpipers foraging, 3 Yellow crowned Night herons ( 2 juveniles & 1 adult), 2 Greater Yellowlegs and 5 Ospreys-1 adult on perch consuming a fish.

I'm having two problems, but apparent when running the query_gpsdo_sensors utility: > > 1) USRP only sporadically locks to the GPSDO 10 MHz reference. On most runs of query_gpsdo_sensors, it does not report lock. > 2) The UHD clock isn't getting set according to GPS time.

- 1679, 17 juveniles, August 10, (710).

> I have a old data device that is spitting out TTL data at 10 MHz. > There's just a data line (no clock) but the edges clearly indicate an > internal 10 MHz clock. > I'd like to do a continuous capture of the bits, for up to tens of > minutes, into a PC. That comes to about 1 GB of raw data.

Just 10/100 Mb Ethernet)? > > Thanks, > > iftah > > > _______________________________________________ > USRP-users mailing list > USRP-users@lists.ettus.com > http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com You'll need to use an intermediate 1GiGe switch--plug your laptop into one port, and the N200 into the other.

I am testing pjsua app on Windows 10 compiled with Visual Studio. I connect directly to a Siemens HiPath server. The registry works correctly for a few hours until in one of the re-registrations there is a strange behaviour. In one of the re-registers, pjsua creates a new TCP transport with a different source port.