Hi,
Guest
Search results for all lists
List: ctbirds@lists.ctbirding.org
From: Glenn Williams
Re: [CT Birds] Hummingbird Behavior
Wed, Sep 10, 2008 4:32 PM
> For subscription information visit
> http://lists.ctbirding.org/mailman/listinfo/ctbirds_lists.ctbirding.org
List: pjsip@lists.pjsip.org
From: Gang Liu
Re: [pjsip] Volume Control in APS-Direct
Mon, Apr 6, 2009 9:26 AM
);
> else
> vol = (vol>=10 ?
List: ctbirds@lists.ctbirding.org
From: Marty Swanhall
Re: [CT Birds] Bird Calls For Hunters: A Little OT
Sat, Nov 10, 2012 3:36 PM
Thanks, Chris, for the info
Marty
On Sat, Nov 10, 2012 at 9:05 AM, Christopher Lovell wrote:
> Owl calls are used by turkey hunters to cause turkeys to gobble,
> thereby making them easier to locate.
>
> Chris
>
>
>
> Sent from my iPhone
>
> On Nov 10, 2012, at 8:59, Frank Mantlik wrote:
>
> > Marty,
> > It might
List: ctbirds@lists.ctbirding.org
From: Dan Rottino
Re: [CT Birds] Common Murre
Sat, Dec 26, 2015 6:38 PM
For subscription information visit http://lists.ctbirding.org/mailman/listinfo/ctbirds_lists.ctbirding.org
List: ctbirds@lists.ctbirding.org
From: Tina and Peter Green
Re: [CT Birds] Passerine movement starting
Mon, Jul 10, 2017 8:43 PM
Tina Green
Westport
Sent from my iPhone
> On Jul 10, 2017, at 3:52 PM, Frank Gallo via CTBirds wrote:
>
>
> Hi Roy,
>
> Not for passerines. Some passerines are already heading south... Herons do post-breeding...
>
>
>
>
> Frank Gallo
>
> Life is short.
List: ctbirds@lists.ctbirding.org
From: brainardsj
Re: [CT Birds] Black-bellied Whistling Duck
Tue, Aug 14, 2018 10:20 PM
For subscription information visit http://lists.ctbirding.org/mailman/listinfo/ctbirds_lists.ctbirding.org
List: usrp-users@lists.ettus.com
From: mleech@ripnet.com
Re: [USRP-users] SBX phase alignment in GNU Radio with timed commands
Thu, Jun 2, 2016 3:36 PM
.
>
> def set_fc(self, fc):
> self.fc = fc
> self.blocks_message_strobe_0.set_msg(uhd.tune_request(self.fc,0))
> self.uhd_usrp_source_0.set_center_freq(uhd.tune_request(self.fc,0), 0)
> self.uhd_usrp_source_0.set_center_freq(uhd.tune_request(self.fc,0), 1)
> self.uhd_usrp_source_0.set_center_freq(uhd.tune_request(self.fc,0), 2)
> self.uhd_usrp_source_0.set_center_freq
List: discuss@lists.openscad.org
From: jpmendes
Re: [OpenSCAD] openscad hangs up after upgrading to Windows 10
Tue, Feb 16, 2016 7:28 PM
jpmendes
--
View this message in context: http://forum.openscad.org/openscad-hangs-up-after-upgrading-to-Windows-10-tp16155p16160.html
Sent from the OpenSCAD mailing list archive at Nabble.com.
List: time-nuts@lists.febo.com
From: life speed
Re: [time-nuts] Advice on 10 MHz isolation/distribution (Clay)
Fri, Feb 12, 2010 4:32 PM
Message: 3
Date: Thu, 11 Feb 2010 23:02:30 -0500
From: Bob Camp
Subject: Re: [time-nuts] Advice on 10 MHz isolation/distribution
(Clay)
Hi
I suspect your noise spike can be cured by a series R-C to ground from the junction of Q1 base, Q7 base and all the other stuff. Something is going to have to set a high frequency roll off.
List: discuss@lists.openscad.org
From: jon
Re: loooooooong f6, like 10+ minutes but works finally
Mon, Jul 5, 2021 2:39 PM
You can also get desiccant at crafts stores like Michael's
(in the States)
On 7/5/2021 10:27 AM, Jan Wieck wrote:
> On 7/5/21 6:57 AM, Ray West wrote:
>> I don't think it is just moisture in your case. To test that, simply
>> unwind enough filament from the spool, place in your oven for an hour or
>> so at 50deg C, then print with that length asap.