One way is to go to the "Buoy" section (across the top) and then select the area you want and from there the buoy in the location you're interested in observing. Other links across the top of the page work similarly.

According to documentations the top speed is 10.5 knots, but mine is hardly doing 9 knot “flat out” at 2400 rpm. We normally cruise around 7 knots so the top speed is not a real problem, I just wondering if I have the right propeller. My prop is a 23 LH 16 and I think that the pitch is maybe too small.

I cut some more out of the top so it would get more light and secured the top and bottom of the jug so I could suspend it under the Bimini. I'm sure there are better ways to do this, a mesh container? It's amazing how bright this is and how long it lasts after it sits outside all day.

On 04/03/2016 08:04 AM, Chris Wilkinson via Trawlers-and-Trawlering wrote: > The foam on the top of my Northern Lights 8 KW has separated from the top of the sound shield. I'm looking to glue it back in place. Any suggestions for an adhesive to use? > I have this same problem.

The image shows from top to bottom the lineair extrusion of the two 2D layers. They look fine. The lowest object is the sweep of the two 2D objects. The 2D objects are build from 900 point and start on the left lower corner follow the quarter circle to the bottom and then go counter clockwise back to the start.

Alternatively, you could set things up so that the top and bottom of the climbing curve are banked differently, but that's not compatible with OP's goal for a modular climbing curve. -- Sent from: http://forum.openscad.org/

=0) linear_extrude(height,scale=top) square(side,center=true);

Hi, Did you try running 'make GUI=1 X310_HG_RFNOC' in usrp3_rfnoc/top/x300 and then saving the project file in the Vivado GUI after the project finishes building?

It now has the AD9835 device on the back, and more chips on the top. The rest of the unit looks 'normal'. I've attached a photo of two units showing the synthesizer boards, with the one we are used to shown at the top, and the one I'd like to know more about on the bottom.

Q: Why is top-posting such a bad thing? A: Top-posting. Q: What is the most annoying thing in e-mail?