>> >>> Roy Harvey >> >>> Beacon Falls, CT >> >>> >> >>> From: pgcianfaglione via CTBirds >> >>> To: CT Lists >> >>> Sent: Monday, October 10, 2016 11:58 AM >> >>> Subject: [CT Birds] Riverside Park Hartford >> >>> >> >>> >> >>> 10/10 Hartford, Riverside Park Pond - 1 AMERICAN WHITE PELICAN. >> >>

But it becomes one way voice after 10 minutes conversation. The PJSIP is still able to heard the voice from the PSTN side, but the PSTN side cannot heard the voice from PJSIP windows side afte 10 minutes. Did anyone this this problem before? The eyebeam did not have this issue over the same PTSN gateway. Thank, UN.

DDS which results > in a precise 10 mhz output and 1 PPS used to compare with the > GPS timing receiver 1 PPS and adjust the correction and its > derivatives over time for optimum tracking. > > This means they can take a slightly off frequency but > stable 10 mhz and make a precisely on frequency and even more > stable 10 mhz locked to GPS when GPS is

Click for free information on 401(k) plans. http://thirdpartyoffers.juno.com/TGL2121/fc/Ioyw6i3mKKfuRrybaffsfSJtwzQLQxH17yL5YmNvuLpGV08If33A1h/

Coot (1) Gadwell (1 Pair) European Starlings (30ish) Northern Mocking Bird (1) Sparrows (3) 1/10/2012 STRATFORD BOAT RAMP 7:15 - 7:45 a.m. Assorted Gulls Coots (4) 1/10/2012 FRASH POND, Stratford (from behind stores, could not make out what was across pond but saw no Geese). 7:45 - 7:55 a.m.

I've decided to use an Isotemp OCXO134-10 oscillator and have several decisions which I would like to vet with those of you that have been down this road before. The Isotemp unit has an EFC range of 0 to 8 Volts; the Fury has an EFC range of 0 to 5 volts.

For tickets to the event, visit http://asalh.org/Annual_Luncheon_purchase.html SANDRA M.

Hi folks, This is a heads up that the New York State Birders Conference/New York State Ornithological Association Annual Meeting will be hosted by the Buffalo Ornithological Society in Niagara Falls, New York on November 10, 11, and 12 this year.

On 04/22/2012 10:47 PM, bg@lysator.liu.se wrote: > With factory default settings with 2 PRS-10s, connecting 1PPS_out from one > unit to 1PPS_in on the other, would not align the 1PPS_out pulses. They > were off by several hundred of ns. It was probably an operator error > somewhere. We just did not find the error in the time frame we had > available.

My requirement/desire is to have a 10 MHz standard for my lab that I can trust to an accuracy of 7 decimal places (10 ppb?), so anything that is good to a few ppb is certainly adequate for what I am looking for. I have a OCXO unit that is voltage adjustable - for example, adjusting this to 10.0000000 MHz per my HP 5334A requires -12.71V.