If you happen to be the owner of one of the top 10 trawlers, and have a JPG available of your boat, please send it to me by private email for use on Trawler World Online in a feature on the List's initial top 10 list.

The Morion MV89 doubles internally from 5 to 10 MHz; on mine I can see the 5 MHz fundamental on the scope. Every other 10 MHz sine is somewhat higher or lower. Gives an unsteady scope picture.

. ________________________________ Featured Events for 10/26-10/30 [apccfil]

. ________________________________ Featured Events for 10/26-10/30 [apccfil]

Chester, 10/19 - First of season white-throated sparrow arrived in our yard. I'm sure it's many friends aren't far behind. Tammy Eustis

I want to feed it with 10 MHz signal instead, so it is >> synchronised to my main 10 MHz in a frequency standard I am designing. >> >> >> >> The method I’m using has been documented before where we have two >> loops running 9632 times through a 39 instruction loop and >> 55904 times through a 38 instruction loop, each time toggling the output >> pin. >> >> >>

the other connected to the PRS-10, with level shifters >>> as needed.

I would like to know if it is possible to install UHD on Windows 10. Looking here https://files.ettus.com/manual/page_install.html , following the link: http://files.ettus.com/binaries/uhd/latest_release you can find UHD for WINDOWS 7 32/64 bits. I was also thinking to MSYS2 that build a sort of unix environment under Windows (also 10).

Mark Spencer On 2014-11-10, at 10:05 PM, Joseph Gray wrote: >> You can run at 400 KHz by dividing by 5/5 and 4/9. > > True. Either will work. > >> You said "0.2ppm stability". What do you need for accuracy and/or how > are you going to calibrate your setup? > > I will initially calibrate the OXCO against my HP GPSDO.

After running less than 10 hours on the new 2 micron filters, I noticed a substantial increase on my vacuum gauges (high yellow & low red) and just replaced them with new 10 micron filters. Greg Steckel M/V Different Drummer President 35 Sundeck www.chesapeaketrawlering.com www.fmyc.org