Note to Jay: BOSL2's cuboid() can round individual edges, but also can round by groupings, so edges=TOP rounds all the top edges without the need to enumerate them individually. You can also do edges=TOP, except=RIGHT to round 3 of the top edges.

Cranberry Marsh Ontario, Canada Daily Raptor Counts: Sep 26, 2004 ------------------------------------------------------------------- Species Day's Count Month Total Season Total ------------------ ----------- -------------- -------------- Black Vulture 0 0 0 Turkey Vulture 0

Cranberry Marsh Whitby, Ontario, Canada Daily Raptor Counts: Aug 26, 2006 ------------------------------------------------------------------- Species Day's Count Month Total Season Total ------------------ ----------- -------------- -------------- Black Vulture 0 0 0 Turkey Vulture 0

Cranberry Marsh Hawkwatch Whitby, Ontario Wednesday 26 October 2016 Total Species: 11 Turkey Vulture 298 Bald Eagle 3 Northern Harrier 6 Sharp-shinned Hawk 14 Cooper's Hawk 2 Northern Goshawk 3 (this is a minor irruption year) Red-shouldered Hawk 16 Red-tailed Hawk 165 (many Northern Red-taileds subspecies abieticola were noted) Rough-legged Hawk

A USA Today article (May 29, 2014) reports a study that 89-340 million birds per year die from vehicle strikes in the USA.

Sending was easy to implement via pj::Call::sendRequest(). But I couldn't figure out a way to receive (proprietary) SIP INFO messages via PJSUA2. I can observe the received SIP INFO messages inside pj::Call:: onCallTsxState() but I have the following issues: 1) Is onCallTsxState() the best/right place to receive SIP INFO messages via PJSUA2?

DROP IT OR DUNK IT-THE HX460S IS DESIGNED TO TAKE IT The HX460S utilizes a high impact, non-corrosive die-cast case and chassis. This unique case insures the HX460S will withstand the physical abuse a Handheld VHF receives from being dropped or banged on the deck of a boat.

(It's never easy, is it?) My neighbor had one Webasto fan die over the same four year period. I also bought an auto heater radiator and added a room type air fan, metal cage, about $60 total, with approx 5,000 BTU output...Works fine but is noiser than the Webasto, less than the red dot.

." > > I bought the harbor freight one and it works well but to crimp the 2/0 I > had > to open up a die to fit using a grinder & metal file (the dies are not > that > hard). It looks handy to also be used to swage and it comes with enough > dies that are easy to modify for other purposes.

> Gain may have to be backed off if thermal > oscillations do not die down, but the metal block acts as an > integrator and the circuits are very easy to get > high gain and sensitivity. > The whole block is packed in two inches of foam insulation, my 1MHz > oscillator only draws about 80 mA at 12 volts. > The temperature is set to 40 C. > The stability