Stem micro-leakage of air will soon collect until it makes its way to the injection pump, then it's surge and die. Apollo ball valves in 1/4" to 1/2" sizes are all $10.56 each.

If it falls overboard or dies, I will cry but not die! I run the $10k 8kw when I cook on range, run A/C, make hot water, which is not often. Downside? I look like a blow-boater!! Ideal would be a small, inexpensive, installed 1200 watt diesel 12vdc genset. No charger loss and speed would match load. Note I said inexpensive.

Keith Many people would sooner die than think; In fact, they do so. -- Russell ___________________ 50 amp (125 volt) Marinco shorepower cable needs dock side fitting replaced. Have new male plug and yellow "boot" which covers assembly. Is it a diy job? For example, I don't see how old boot comes off.

. >> Russ >> >> >> Be Holy or Die Trying" St Stephen 33AD >> >> >> "Be joyful always; Pray constantly; Give thanks in all circumstances, for >> this is God’s will for you in Christ.....Test everything.

With the electronic QSB the engine doesn't die if there's not enough turbocharged air for higher RPMs, the engine just won't increase RPMs beyond about 1600-1700 RPMs. But I've never experienced a shutdown like you describe. Good luck, Milt Baker, American Tug 34 Bluewater IV and Nordhavn 47 Bluewater

Occasionally I'll come across a zinc with poor threads, then I just chase the threads with a correct size die, in my case 516. I'd love to hear of other approaches to ridding a plug of broken off zincs.

gc714eec-dirty (Dec 03 2011 - 09:44:39) OMAP3530-GP ES3.1, CPU-OPP2, L3-165MHz, Max CPU Clock 720 mHz Gumstix Overo board + LPDDR/NAND I2C: ready DRAM: 512 MiB NAND: 0 MiB MMC: OMAP SD/MMC: 0 *** Warning - readenv() failed, using default environment In: serial Out: serial Err: serial Board revision: 1 Direct connection on mmc2 No EEPROM on expansion board Die

Now I get past the previous error, but die at the 50% point: [ 50%] Building CXX object lib/CMakeFiles/gnuradio-ettus.dir/gnuradio-ettus_automoc.cpp.o Linking CXX shared library libgnuradio-ettus.so /usr/local/oecore-x86_64/sysroots/armv7ahf-vfp-neon-oe-linux-gnueabi/usr/lib/libuhd.so: file not recognized: File format not recognized collect2: error: ld returned

Darum sind die revolutionären geistigen Bewegungen, welche alles Frühere für nichtig erklären, im Recht, denn es ist noch nichts geschehen. - Franz Kafka > On Mar 16, 2016, at 08:40, Jason Matusiak wrote: > > > This is the case I designed and use.

>According to the datasheet of the MGA62563 the device will directly die > >with 0V bias. > > >Ofcourse there is vcc 3.3 volt on the supply pins. > > >Anyone a clue which chip this should be?