You can do it if your scrub hard enough, but you'll be getting that color the same way as you would with sandpaper or chemicals-- you'll be removing the top surface of the wood.. All this may make it sound like teak is the worst deck material on the planet, but in fact it's one of the best. It's easy on the feet and it doesn't get slippery when wet.

His quote was around $4k if I did all the prep. I have done alot of painting in the commercial construction trade - alot of spraying with 1 part paints, and alot of rolling with 1 and 2 part paints.

Wilton - Allens Meadow 4/26/07 - 2 pm. 10 Savannah Sparrows feeding at the top end of the dirt parking lot. 2 Chipping Sparrows near Rt 7 entrance. Reminding myself to check for Deer Ticks after birding. Mike Warner Wilton

To prevent >twisting, I fitted a plywood board on the top bolted to the top front >and rear angle pieces.  To prevent a side-to-side movement required an >8 inch wide piece of scrap aluminum plate bolted to the rear vertical >posts.  This is easy to do as there are a plethora of precision spaced >holes available.

All four were replaced and they have been working fine. The two older 732A's have thermistor values in the 3k-4k range. The newer unit (based on the newer heater rev) is around 4.25K. All three had their potentiometers changed on the regulator and pre-regulator boards. The datecodes on all appeared to be from 1985.

q=20250225134423) How SB 5450 Improves Transparency * A Public Sewage Spill Database – Ecology will create an easy-to-use, public website listing all reported sewage spills, including details on location, severity, and response efforts. + Annual Reports – Starting in March 2026, an annual list of all reported sewage spills will be made publicly available to

This solves the "top heavy" > > problem >

By all means go and build that - but you will end up > >> working at the library level with csg libraries, or outputting an > openscad > >> file of the resulting construct.

This method just does not req the drilling of another hole in the tank at the top for the return and is cheap and easy. CCC Patterson,La.

On Sat, May 26, 2012 at 1:12 PM, Magnus Danielson < magnus@rubidium.dyndns.org> wrote: > On 05/26/2012 05:31 PM, paul swed wrote: > >> Hello to the group did that quite a while ago they are on the KO4BB >> website. >> > > Oh, great!