Since then, I've been looking at filter design tools, trying to match what's in there to any kind of "standard" filter response, and tweaking fc and impedance too. So far, I've found nothing that's close.

Peter -----Original Message----- From: Faure, Marin [mailto:marin.faure@boeing.com] Sent: Friday, December 05, 2003 1:02 PM To: trawler-world-list@lists.samurai.com Cc: Pisciotta, Peter P, GLPRO Subject: RE: Force 10 propane stove >Definitely talking about Force 10 propane stove (no experience with electric).

Join us for Open Figure Drawing every Wednesday from 6 PM - 8 PM -- $10 !!! Everyone is welcome! REGISTER HERE *Or Pay at the door* -- *feast arts center * *1402 S. 11th St.* *Tacoma, WA 98405* *feastarts.com *

Hammonasset SP 10/11 Another big private interest event being held at Hammo today. Lots of vehicle traffic. Sparrows and yellow-rumps along the margins. Killdeer, gulls and a few egrets in marshes. West end continues to be blocked off. Event parking in nature center lot. P Sent from my iPhone

Holiday Beach Ontario, Canada Daily Raptor Counts: Oct 10, 2006 ------------------------------------------------------------------- Species Day's Count Month Total Season Total ------------------ ----------- -------------- -------------- Turkey Vulture 686 12253 12993 Osprey 0 10

=0.5 *KF=0 AF=1 BV=inf IBV=1e-3 TNOM=27 .ENDS bzx84b6v2lt1 .MODEL 2N3904__BJT_NPN__1 NPN(Is=6.734f Xti=3 Eg=1.11 Vaf=74.03 Bf=416.4 Ne=1.259 + Ise=6.734f Ikf=66.78m Xtb=1.5 Br=.7371 Nc=2 Isc=0 Ikr=0 Rc=1 + Cjc=3.638p Mjc=.3085 Vjc=.75 Fc=.5 Cje=4.493p Mje=.2593 Vje=.75 + Tr=239.5n Tf=301.2p Itf=.4 Vtf=4 Xtf=2 Rb=10

I added a small LPF about 300 MHz (10 pF/50 nH/10 pF), inside its own tiny shield box, forming the last bastion of filtering, right at the inlet of the pigtail cable that goes to the isolated SMA bulkhead fitting, and including another CM choke (only 1 pass of cable).

. > > Over the 10 s of capture, I switch of the signal at the same time on > both channels (exact same time because the switch is before the RF > coupler). Both capture are roughly aligned in time, but when I zoom, I > see 26 us of delay (which is roughly 10 samples at rx_rate_1 of > 390625). Am I wrong expecting a "perfect timing" ?

And that's 10 dollars per boat.not per foot! Pump-out for a > minimum charge. > Going north and through the locks, your next free docking space will be > on the wall in Mechanicville, NY.

I have two newish (6 month old or less) rx 580's, not running any advanced features like Eyenfinity or crossfire, no overclocking, not coin mining, etc. I will admit that I am more of an OS/Hardware/Server Software flavor of IT guy and GPU drivers are not on my nice list but to literally break overnight like that is beyond strange.