AMONG THE NON-RAPTORS--- 5 RUSTY BLACKBIRDS (one of which is a young one that has dark eyes) on the path near the platform all morning; HOUSE FINCH; white-throated sparrow.

There are four bolts and a few screws holding the top part to the bottom. Remove all this and cut the wiring from the bottom part and the top will come off and can be easily lifted out. Then the bottom is heavy but also relatively easy to lift out of the boat.

Easy enough if I memorise something like 'Top-Bottom, Left-Right, Front-Back', *and *they were activated by Ctrl plus '4-5, 6-7, 8-9'. Terry -- Sent from: http://forum.openscad.org/

For questions, please email hello@whatisyourm.com ### *About M Agency* M Agency is a full-service marketing firm based in Tacoma, WA, specializing in website development, brand storytelling, design and more.

Dennig Subject: T&T: Holding Tank - re-engineering To: "T&T " Date: Tuesday, July 26, 2011, 3:08 PM Hello all,     I think I have put this project off long enough….so assuming the weather does not go back about 100 degrees this weekend, I am planning to start replacing the holding tank system plumbing.

It’s pretty easy to deal with. I have a value “tiny = 1/128;” in all my code. Anywhere this is going to occur I expand the volume by tiny above the surface. It doesn’t matter that much but 1/128 is an exact value in binary and .01 is not.

Unit No. 450, Floor-4, Tower B2, Spaze iTech Park, Sector-49, Sohna Road, Gurgaon-122018, Haryana (India) ***Cell*: +91-9999558952 Website: www.drishti-soft.com | www.ameyosuite.com Awards & Recognitions : NASSCOM Innovation Awards 2008

. > I have never been able to confidently cope with this problem, I just > keep hacking the > system and sooner or later I get the COM port right with the right > settings and all is well. > There seem to be up to 3 layers to get right. > This may be because I use USB to serial converters or just be > inherent to the later Windows OS. > cheers, Neville

I've had several PRs pass all of the tests and then die, or change radically, or go on hold for a long time. > > > > _______________________________________________ > OpenSCAD mailing list > To unsubscribe send an email to discuss-leave@lists.openscad.org

thanks, Said **************************************See AOL's top rated recipes (http://food.aol.com/top-rated-recipes?NCID=aoltop00030000000004)