Friday and Saturday, April 26 and 27. People make fun of their jobs all the time. Actors are no different, poking fun at the quirks of commercial theatre, though performers usually keep their parodies to themselves. Forbidden Broadway is what happens when they don't.

I slightly scratched the die itself while > separating it from the epoxy, but the die itself is clearly visible. > Based on a sample size of one and the markings on the die itself, it > appears the chip is authentic.

It has to be rotated by hand, but the Delrin bearings seem to be easy to move. Our lift is about 8 feet to our cabin top. Cheers, Tom

This link takes you to our web page on the Ontario Field Ornithologists website where you can quickly find instructions for joining and leaving the list as well as how to set up your email software to send messages to the list. Ontbirds Guidelines also make suggestions on content.

If you do not keep it truly full, the shifter shaft on the top of the tranny might run dry and bind (some lessons are hard learned! ;-)). Jim In a message dated 10/18/2009 12:00:26 A.M.

If you're >> trying to connect two arbitrary objects into a 3d shape that's a difficult >> problem that may not have an easy solution, depending on your shapes. >> There may be several solutions, all perhaps equally valid. >> >> You might take a look at skin() from BOSL2. >> >> https://github.com/revarbat/BOSL2/wiki/skin.scad#functionmodule-skin >> >> There was

CaptnWil, Ret 40 Pier Pointe New Bern NC 28562 (252) 636-3601 captnwil@coastalnet.com > If anyone wants to see a Vampire oil sampler the website is > www.easyvac.com > > Very easy to use and a good way to do oil samples

On 6/26/2013 6:53 PM, David Kirkby wrote: > On 27 June 2013 01:45, Doug Calvert wrote: >> The BBC recently did a three part series titled Precisoin: The Measure >> of All Things. >> >> Part 1 is Time and Distance >> Part 2 Mass and Moles >> Part 3 Is Heat, Light and Electricity >> >> Probably nothing ground breaking for any time

I do own HP3456 DMMs that are at the top of my > > instrumentation pecking order. I have all the necessary gear to > > calibrate these DMMs according to ancient HP documentation. At the > > top of my cal. chain is the 731B, called out in HP3456 original > > documentation.

Designs from that era need to be upgraded to really get them to be all they can be with SA turned off.