Details; After build and install packet_router(for host), burn images that supports mimo, connect only one usrp2 to ethernet and don't connect mimo cable anywhere, i get these results; When i run uhd_find_devices and the result is linux; GNU C++ version 4.4.3; Boost_104000; UHD_0001.20101221140638.1 --------------------------------------

If this is OK, please contact support@ettus.com for more details. -- Marcus Leech Principal Investigator Shirleys Bay Radio Astronomy Consortium http://www.sbrac.org

broken. Connected it directly to a PC, > and tried with both Heather and Tboltmon. Heather says No COM1 Serial > Port data seen, and Tboltmon shows data being sent, but nothing being > received. Even tried a factory reset via Tboltmon, to no avail. > > Have no idea why it might have stopped working. Any suggestions ? TIA. OK, this is on *any* suggestions... Have you unhooked it completely, let it sit there for a while and then hook it up again? Sometimes it works... when it is mildly upset. Cheers, Magnus

-- Raj, VU2ZAP Bangalore, India.

all is well. There seem to be up to 3 layers to get right. This may be because I use USB to serial converters or just be inherent to the later Windows OS. cheers, Neville Michie On 17/07/2010, at 5:02 PM, Adam Feigin wrote: > After rebooting one of my servers, I noticed that I was no longer > getting information from my Thunderbolt. Low and behold, it really > seems > to be no longer supplying TSIP packets on the serial port. The PS is > okay, and the PPS and 10Mhz outputs also are working. Its just the > serial output which seems to be broken. Connected it directly to a PC, > and tried with both Heather and Tboltmon. Heather says No COM1 Serial > Port data seen, and Tboltmon shows data being sent, but nothing being > received. Even tried a factory reset via Tboltmon, to no avail. > > Have no idea why it might have stopped working. Any suggestions ? > TIA. > > > > _______________________________________________ > time-nuts mailing list -- time-nuts@febo.com > To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/ > time-nuts > and follow the instructions there.

COM port > has been assigned to it. > I have never been able to confidently cope with this problem, I just > keep hacking the > system and sooner or later I get the COM port right with the right > settings and all is well. > There seem to be up to 3 layers to get right. > This may be because I use USB to serial converters or just be > inherent to the later Windows OS. > cheers, Neville Michie > > On 17/07/2010, at 5:02 PM, Adam Feigin wrote: > > > After rebooting one of my servers, I noticed that I was no longer > > getting information from my Thunderbolt. Low and behold, it really > > seems > > to be no longer supplying TSIP packets on the serial port. The PS is > > okay, and the PPS and 10Mhz outputs also are working. Its just the > > serial output which seems to be broken. Connected it directly to a PC, > > and tried with both Heather and Tboltmon. Heather says No COM1 Serial > > Port data seen, and Tboltmon shows data being sent, but nothing being > > received. Even tried a factory reset via Tboltmon, to no avail. > > > > Have no idea why it might have stopped working. Any suggestions ? > > TIA. > > > > > > > > _______________________________________________ > > time-nuts mailing list -- time-nuts@febo.com > > To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/ > > time-nuts > > and follow the instructions there. > > > _______________________________________________ > time-nuts mailing list -- time-nuts@febo.com > To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there.

wrote: > After rebooting one of my servers, I noticed that I was no longer > getting information from my Thunderbolt. Low and behold, it really seems > to be no longer supplying TSIP packets on the serial port. The PS is > okay, and the PPS and 10Mhz outputs also are working. Its just the > serial output which seems to be broken. Connected it directly to a PC, > and tried with both Heather and Tboltmon. Heather says No COM1 Serial > Port data seen, and Tboltmon shows data being sent, but nothing being > received. Even tried a factory reset via Tboltmon, to no avail. > > Have no idea why it might have stopped working. Any suggestions ? TIA. > > > > _______________________________________________ > time-nuts mailing list -- time-nuts@febo.com > To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. > >

including attaching the thing to a Moxa Serial > device server, and i dont get anything out at all. I've let it sit > overnight, power cycling, tried different machines, (VirtualBox, Wine > with USB serial and direct serial) all to no avail. It simply gives no > output at all. Just rebooting should not be the killer, but power-cycling may be. Grounding of equipment may also be an issue, as you connect things around. Cheers, Magnus

On 11/21/07, aashti manocha wrote: > > HI, > > Since i am new to this technology, befor beginning i just wanted to know which platform should i use(windows mobile or symbian) in order to establish an audio call. and whether pjsip is well tested and supported for that platform.Which version of pjsip should i use in order to do that