Hi,
Guest
Search results for all lists
List: time-nuts@lists.febo.com
From: Magnus Danielson
Re: [time-nuts] Dithering vs. locking all the clocks to the OCXO?
Wed, Jul 5, 2006 10:03 AM
Acheiving sub-nanosecond relative timing should not at
> >all be unfeasable but should rather be consider fairly easy.
>
> Do you mean easy for fibre or for a GPSDO?
With the fibre-based two-way time transfer. For shorter distances you can do
well on coax, but for the distance range you require you really want to go
fibre.
List: citams@list.citams.org
From: Christena Nippert-Eng
[CITASA] wanted! website person
Wed, Jan 5, 2011 2:54 PM
Is there anyone out there who would like to take on the job of updating our website?
There is a $500 stipend for the individual who is generous enough to serve the section in this way.
It's a pretty minimal job, but an important one. Gustavo did it himself, but I'm clueless and must rely on the talent around me.
List: ctbirds@lists.ctbirding.org
From: Susanne Shrader
SCORP website
Mon, Dec 11, 2017 5:21 PM
Website Specifics to
Hello birders,
Please take a few minutes to provide comments for the State Parks SCORP deep: scorp - CT.gov
List: discuss@lists.openscad.org
From: Raymond West
Re: open source makercoin
Sat, Mar 2, 2024 12:09 PM
.
>
> will try to keep that in mind :D
>
>
> You have the basic shape of the coin being a torus unioned
> with a cylinder, with a sphere subtracted. But that's the same
> as a circle unioned with a rectangle, with a circle
> subtracted, all rotate-extruded.
List: trawlers@lists.trawlering.com
From: Robin
Hard top bridge enclosure
Sat, Dec 9, 2006 3:59 PM
If you
current height is a bit cramped, and you'll be reusing a soft top frame, you
likey can adjust it up a few inches for more headroom..I did that...but you'll
need new enclosure curtains or an additional few inches sewn on either the top
or bottom to existing ones....Otherwise, with a new support fram, specifiy
tghe headroom you'd like...a few inches will
List: trawlers@lists.trawlering.com
From: Chester Brummett
Bimini Top Fabric Material
Sun, Sep 9, 2007 7:57 PM
Replacement
tops are not exactly cheap, I would like to get more than five years before
replacement.
Chet
DeFever 44+5, Cygnet
Daytona Beach, FL
List: time-nuts@lists.febo.com
From: Brucekareen@aol.com
Conducting Bench Top Material
Mon, Jan 25, 2010 3:42 PM
My electronic bench is an old commercial one made with steel stampings and
a steel top covered with Masonite. The Masonite is still in fair
condition. Although over the years the non-conductive top has been an asset in
avoiding short circuits, etc., I am concerned about static discharges when
handling modern semiconductors.
List: time-nuts@lists.febo.com
From: Mark Sims
A look inside the DS3231
Sun, Jul 30, 2017 10:47 PM
But, past a certain point, it all boils down to a "spec waving" contest ;-)
----------------
> What's the motivation for this, other than "because we can"? Aren't
existing RTC chips capable of running 10+ years from a lithium coin cell
already, to the point where the cell's self-discharge is the limiting
factor?
List: trawlers@lists.trawlering.com
From: halwyman@csi.com
RE: Top Ten trawlers
Tue, Dec 29, 1998 10:37 PM
Hal
> -----Original Message-----
> From: owner-trawler-world-list@samurai.com
> [mailto:owner-trawler-world-list@samurai.com]On Behalf Of Arild Jensen
> Sent: Tuesday, December 29, 1998 10:01 AM
> To: Trawler World List
> Subject: Top Ten trawlers
>
>
> My submissions for ther list are:
>
> Romsdahl 52 - No longer in production but many still available
>
List: oama@lists.imla.org
From: Jon Miller
The Oklahoma Purchasing System
Wed, Aug 9, 2023 10:14 PM
Its website also states that: "TOPS PROCURES AND AWARDS ALL VENDOR CONTRACTS ACCORDING TO OKLAHOMA STATUTES...."