Cruising America's Great Loop and other inland routes
View all threadsIn a message dated 3/21/08 12:00:23 AM, Kevin writes:
Much of the canal has a 10 knot limit.
Actually the speed limit is 10 MPH, not KNOTS. This works out to about 8.6
Kn. boat speed. Distances along the Canal and the Hudson River are measured in
statute miles although currents in the Hudson are usually stated in knots. This
is designed to exercise the mathematical facilities of the navigator. A
pocket calculator is a good help.
Larry Z
Create a Home Theater Like the Pros. Watch the video on
AOL Home.
(http://home.aol.com/diy/home-improvement-eric-stromer?video=15?ncid=aolhom00030000000001)
Thanks for the clarification Larry; my bad. I top out at about 8 Kn so
no worries for me.
Kevin
-----Original Message-----
From: great-loop-bounces@lists.samurai.com
[mailto:great-loop-bounces@lists.samurai.com] On Behalf Of
LRZeitlin@aol.com
Sent: Friday, March 21, 2008 10:44 AM
To: great-loop@lists.samurai.com
Subject: Re: GL: Canal speeds
In a message dated 3/21/08 12:00:23 AM, Kevin writes:
Much of the canal has a 10 knot limit.
Actually the speed limit is 10 MPH, not KNOTS. This works out to about
8.6
Kn. boat speed. Distances along the Canal and the Hudson River are
measured in
statute miles although currents in the Hudson are usually stated in
knots. This
is designed to exercise the mathematical facilities of the navigator. A
pocket calculator is a good help.
Larry Z
Create a Home Theater Like the Pros. Watch the video on
AOL Home.
(http://home.aol.com/diy/home-improvement-eric-stromer?video=15?ncid=aol
hom00030000000001)
http://lists.samurai.com/mailman/listinfo/great-loop
To modify your Great-Loop subscription options (change email address,
unsubscribe, etc.) go to:
http://lists.samurai.com/mailman/options/great-loop
We were on the Erie Canal last summer and I seem to
recall that parts of the canalized Mohawk River had
speed limits of 40mph. Of course, travelling on a
slow trawler, I didn't pay close attention to those
signs, nor to the 10mph signs either.
Wade Ehlen
Albin 36 Miss Happ
--- LRZeitlin@aol.com wrote:
In a message dated 3/21/08 12:00:23 AM, Kevin
writes:
Much of the canal has a 10 knot limit.
Actually the speed limit is 10 MPH, not KNOTS. This
works out to about 8.6
Kn. boat speed. Distances along the Canal and the
Hudson River are measured in
statute miles although currents in the Hudson are
usually stated in knots.
Larry Z
____________________________________________________________________________________
Be a better friend, newshound, and
know-it-all with Yahoo! Mobile. Try it now. http://mobile.yahoo.com/;_ylt=Ahu06i62sR8HDtDypao8Wcj9tAcJ
-----Original Message-----
We were on the Erie Canal last summer and I seem to
recall that parts of the canalized Mohawk River had
speed limits of 40mph.
When I was up there in 2005, the lock tenders on that stretch confirmed that
to me too.
Kevin