Hello Benny, I wish to test a basic SIP UA to UA call using the PJSIP lib on Windows 5.0 platform. I had successfully built and run the wince_demos project using Windows Mobile 5.0 Pocket PC Emulator with VS 2005, whilst choosing the appropriate SDK (Windows Mobile 5.0 Pocket PC SDK) and Deployment Device (Windows Mobile 5.0 Pocket PC Emulator) However, I get the following output in /pjsua.txt (under the device files) "02:08:32.000 sip_endpoint.c Module "mod-pjsua-log" registered 02:08:32.000 sip_endpoint.c Module "mod-tsx-layer" registered 02:08:32.000 sip_endpoint.c Module "mod-stateful-util" registered 02:08:32.000 sip_endpoint.c Module "mod-ua" registered 02:08:32.000 sip_endpoint.c Module "mod-100rel" registered 02:08:32.000 sip_endpoint.c Module "mod-pjsua" registered 02:08:33.000 sip_endpoint.c Module "mod-invite" registered 02:08:42.000 pjsua_core.c STUN server stun.fwdnet.net resolved, address is 255.255.255.255:3478 02:08:43.000 pjsua_core.c Error resolving STUN server: gethostbyname() has returned error (PJ_ERESOLVE) [status=70018]" Kindly let me know where I might be missing here. Might this be a IPV6 issue? Thanks, ~Ryan **************** CAUTION - Disclaimer ***************** This e-mail contains PRIVILEGED AND CONFIDENTIAL INFORMATION intended solely for the use of the addressee(s). If you are not the intended recipient, please notify the sender by e-mail and delete the original message. Further, you are not to copy, disclose, or distribute this e-mail or its contents to any other person and any such actions are unlawful. This e-mail may contain viruses. Infosys has taken every reasonable precaution to minimize this risk, but is not liable for any damage you may sustain as a result of any virus in this e-mail. You should carry out your own virus checks before opening the e-mail or attachment. Infosys reserves the right to monitor and review the content of all messages sent to or from this e-mail address. Messages sent to or from this e-mail address may be stored on the Infosys e-mail system. ***INFOSYS******** End of Disclaimer ********INFOSYS***

Hi Vishesh, this issue sounds similar to what's being discussed in the other thread (Getting Started Help Needed (Newbie). I think it's got something to do with emulator's networking, which is just nasty. I've forgotten what exactly is the problem, but there have been many discussions about this in the past, please search the mailing list archive. cheers, -benny On 1/21/08, Vishesh Sharma <Vishesh_Sharma@infosys.com> wrote: > > Hello Benny, > > > > I wish to test a basic SIP UA to UA call using the PJSIP lib on Windows > 5.0 platform. > > I had successfully built and run the wince_demos project using Windows > Mobile 5.0 Pocket PC Emulator with VS 2005, whilst choosing the > appropriate SDK (Windows Mobile 5.0 Pocket PC SDK) and Deployment Device > (Windows Mobile 5.0 Pocket PC Emulator) > > However, I get the following output in /pjsua.txt (under the device files) > > > > "02:08:32.000 sip_endpoint.c Module "mod-pjsua-log" registered > > 02:08:32.000 sip_endpoint.c Module "mod-tsx-layer" registered > > 02:08:32.000 sip_endpoint.c Module "mod-stateful-util" registered > > 02:08:32.000 sip_endpoint.c Module "mod-ua" registered > > 02:08:32.000 sip_endpoint.c Module "mod-100rel" registered > > 02:08:32.000 sip_endpoint.c Module "mod-pjsua" registered > > 02:08:33.000 sip_endpoint.c Module "mod-invite" registered > > 02:08:42.000 pjsua_core.c STUN server stun.fwdnet.net resolved, address > is 255.255.255.255:3478 > > 02:08:43.000 pjsua_core.c Error resolving STUN server: gethostbyname() > has returned error (PJ_ERESOLVE) [status=70018]" > > > > Kindly let me know where I might be missing here. Might this be a IPV6 > issue? > > > > Thanks, > > ~Ryan > **************** CAUTION - Disclaimer ***************** > This e-mail contains PRIVILEGED AND CONFIDENTIAL INFORMATION intended > solely for the use of the addressee(s). If you are not the intended > recipient, please notify the sender by e-mail and delete the original > message. Further, you are not to copy, disclose, or distribute this e-mail > or its contents to any other person and any such actions are unlawful. This > e-mail may contain viruses. Infosys has taken every reasonable precaution to > minimize this risk, but is not liable for any damage you may sustain as a > result of any virus in this e-mail. You should carry out your own virus > checks before opening the e-mail or attachment. Infosys reserves the right > to monitor and review the content of all messages sent to or from this > e-mail address. Messages sent to or from this e-mail address may be stored > on the Infosys e-mail system. > ***INFOSYS******** End of Disclaimer ********INFOSYS*** > > _______________________________________________ > Visit our blog: http://blog.pjsip.org > > pjsip mailing list > pjsip@lists.pjsip.org > http://lists.pjsip.org/mailman/listinfo/pjsip_lists.pjsip.org > >