Hi, TVB did provide a link to commented code, http://www.leapsecond.com/tools/PPSDIV.ASM Regards, Robert G8RPI. -----Original Message----- From: time-nuts-bounces@febo.com [mailto:time-nuts-bounces@febo.com] On Behalf Of Arnold Tibus Sent: 25 February 2006 14:11 To: Tom Van Baak; Discussion of precise time and frequency measurement Subject: Re: [time-nuts] Thought experiment on a low cost timing board >SNIP > > Also I think Brooks Shera keeps a copy of the code at: > http://www.rt66.com/~shera/index_fs.htm > Unfortunately there is only the hex list of the pic code. As I would like to experiment as well with this modification and try to change some parameters to fit my LPRO and some different OCXOs I own, is there a way to get the commented source code of it? >SNIP Arnold, DK2WT -- DSL-Aktion wegen großer Nachfrage bis 28.2.2006 verlängert: GMX DSL-Flatrate 1 Jahr kostenlos* http://www.gmx.net/de/go/dsl Any opinions expressed in this email are those of the individual and not necessarily Genetix Ltd (Genetix) or any company associated with it. This email and any files transmitted with it are confidential and solely for the use of the intended recipient. If you are not the intended recipient or the person responsible for delivering to the intended recipient, be advised that you have received this email in error and that any use is strictly prohibited. If you have received this email in error please notify Genetix by telephone on +44 (0)1425 624600. The unauthorised use, disclosure, copying or alteration of this message is strictly forbidden. This mail and any attachments have been scanned for viruses prior to leaving the Genetix network. Genetix will not be liable for direct, special, indirect or consequential damages as a result of any virus being passed on, or arising from alteration of the contents of this message by a third party.

Hi, thank you Robert, and many thanks as well to all the others with helpful ideas. I was referring to the original code from Brooks Shera, which is not downloadable from that page. There you find in fact the program as bin. code to be loaded into the PIC processor. But Brooks is very helpful for private and personal use, if one wants to go deeper into details of the original design, which is extraordinary, many thanks therefore! I remain open for further progressive ideas and will continue exploring the world of time and frequencies. Take care of the time, you have only this one! Arnold, DK2WT -------------------------------------------------------- > --- Original Message --- > From: "Robert Atkinson" <robert.atkinson@genetix.com> > To: "Discussion of precise time and frequency > measurement" <time-nuts@febo.com>, "Tom Van Baak" <tvb@leapsecond.com> > Concern: Re: [time-nuts] Thought experiment on a low cost timing board > Date: Mon, 27 Feb 2006 08:51:09 -0000 > > Hi, > TVB did provide a link to commented code, > http://www.leapsecond.com/tools/PPSDIV.ASM > > Regards, > Robert G8RPI. > > -----Original Message----- > From: time-nuts-bounces@febo.com [mailto:time-nuts-bounces@febo.com] On > Behalf Of Arnold Tibus > Sent: 25 February 2006 14:11 > To: Tom Van Baak; Discussion of precise time and frequency measurement > Subject: Re: [time-nuts] Thought experiment on a low cost timing board > > >SNIP > > > > > Also I think Brooks Shera keeps a copy of the code at: > > http://www.rt66.com/~shera/index_fs.htm > > > Unfortunately there is only the hex list of the pic code. > As I would like to experiment as well with this modification > and try to change some parameters to fit my LPRO > and some different OCXOs I own, > is there a way to get the commented source code of it? > > >SNIP > > Arnold, DK2WT > > > > > > Any opinions expressed in this email are those of the individual and not > necessarily Genetix Ltd (Genetix) or any company associated with it. This > email and any files transmitted with it are confidential and solely for the > use of the intended recipient. If you are not the intended recipient or the > person responsible for delivering to the intended recipient, be advised > that you have received this email in error and that any use is strictly > prohibited. If you have received this email in error please notify Genetix by > telephone on +44 (0)1425 624600. > > > The unauthorised use, disclosure, copying or alteration of this message is > strictly forbidden. This mail and any attachments have been scanned for > viruses prior to leaving the Genetix network. Genetix will not be liable for > direct, special, indirect or consequential damages as a result of any virus > being passed on, or arising from alteration of the contents of this > message by a third party. > > _______________________________________________ > time-nuts mailing list > time-nuts@febo.com > https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > -- Lust, ein paar Euro nebenbei zu verdienen? Ohne Kosten, ohne Risiko! Satte Provisionen f�r GMX Partner: http://www.gmx.net/de/go/partner