We made fenderboards using something similar to this Taylor product for our cruise to Alaska. The line used to hang them goes through this white fender and the board. We like getting fuel at commercial docks because it is cheaper and fresher so we use the boards in the Seattle area for that purpose. https://autoplicity.com/11173784-taylor-made-96011-fender-board-guards?msclkid=0905ef40386616b98e68b0d72de03de3&utm_source=bing&utm_medium=cpc&utm_campaign=Shopping%3A%20Avg%20Performers&utm_term=4579603369910371&utm_content=cl3%3Ano%20category [https://media.autoplicity.com/content/images/1894/18945769_0.jpg]<https://autoplicity.com/11173784-taylor-made-96011-fender-board-guards?msclkid=0905ef40386616b98e68b0d72de03de3&utm_source=bing&utm_medium=cpc&utm_campaign=Shopping%3A%20Avg%20Performers&utm_term=4579603369910371&utm_content=cl3%3Ano%20category> Taylor Made 96011 Fender Board Guards<https://autoplicity.com/11173784-taylor-made-96011-fender-board-guards?msclkid=0905ef40386616b98e68b0d72de03de3&utm_source=bing&utm_medium=cpc&utm_campaign=Shopping%3A%20Avg%20Performers&utm_term=4579603369910371&utm_content=cl3%3Ano%20category> Taylor Made 96011 Fender Board Guards autoplicity.com As info, we have Taylor Made Fender Hangers on most stations which allow us to place fenders or the fenderboards where we might need them. https://www.amazon.com/Taylor-Products-1099-Fender-Vertical/dp/B000MJJHI0/ref=sr_1_7?dchild=1&hvadid=78615136052730&hvbmt=be&hvdev=c&hvqmt=e&keywords=taylormade+fender+hangers&qid=1603737732&sr=8-7&tag=mh0b-20 Amazon.com : Taylor Made Products 1099 Boat Fender Hanger (Vertical Rail) : Sports &amp; Outdoors<https://www.amazon.com/Taylor-Products-1099-Fender-Vertical/dp/B000MJJHI0/ref=sr_1_7?dchild=1&hvadid=78615136052730&hvbmt=be&hvdev=c&hvqmt=e&keywords=taylormade+fender+hangers&qid=1603737732&sr=8-7&tag=mh0b-20> Amazon.com : Taylor Made Products 1099 Boat Fender Hanger (Vertical Rail) : Sports &amp; Outdoors www.amazon.com <<<Gary Ritzman>>> M/V Dharma Albin 40 Mercer Island WA

 'Lo all, Gary Ritzman  wrote: > We made fenderboards using something similar to this Taylor product for our cruise to Alaska. The line used to hang them goes through this white fender and the board. We like getting fuel at commercial docks because it is cheaper and fresher so we use the boards in the Seattle area for that purpose. https://autoplicity.com/11173784-taylor-made-96011-fender-board-guards?msclkid=0905ef40386616b98e68b0d72de03de3&utm_source=bing&utm_medium=cpc&utm_campaign=Shopping%3A%20Avg%20Performers&utm_term=4579603369910371&utm_content=cl3%3Ano%20category.... We used the same type fender boards for our 47' sailboat for as long as we owned her. They were similarly made, but for  2"x6" boards. Ours were 4' long. We could use them hung horizontally with or without additional vertically hanging cylindrical fenders between the fender boards and the hull . It just depended upon how much clearance from the pilings we wanted. We never had a problem with the vertical fenders rolling out from behind the boards. I suppose it was because we always tied the fender boards fairly close to the toe rail and lead the tie-ropes out towards the end of the fenders so they did not have much play and therefore, the additional vertically-hung fenders didn't have much play, either. They were more or less permanently tied to the toe-rail and then lashed to two stanchions, when not in use. We seldom had to move them to new locations. Take care and be safe. Wayne Celestial - Destroyed by Hurricane Michael - 2019 Albin43 Sundeck Near Panama City, FL