usrp-users@lists.ettus.com
Discussion and technical support related to USRP, UHD, RFNoC
View all threadsMPM compat number mismatch error with E312
All,
My company recently purchased an E312, which I have been attempting to set
up and test. I have UHD 4.3.0.0-6-g5aa6bc44 on my host PC and downloaded and
flashed the most recent sdimg from
https://files.ettus.com/binaries/cache/e3xx/ onto the E312, which is UHD
4.3.0.0-0-g1f8fd345. Running uhd_usrp_probe on the E312 itself over an SSH
connection works as expected, but when I try to run uhd_usrp_probe from the
host PC, I get the following error:
jjwhite@5cd01378zc:~$ uhd_usrp_probe
[INFO] [UHD] linux; GNU C++ version 11.2.0; Boost_107400;
UHD_4.3.0.0-6-g5aa6bc44
[INFO] [MPMD] Initializing 1 device(s) in parallel with args:
mgmt_addr=192.168.1.174,type=e3xx,product=e310_sg3,serial=3248EB5,name=ni-e3
1x-3248EB5,fpga=n/a,claimed=False,addr=192.168.1.174
[INFO] [MPM.main] Launching USRP/MPM, version: 4.3.0.0-g1f8fd345
[INFO] [MPM.main] Spawning RPC process...
[WARNING] [MPM.PeriphManager] Skipping HW/SW compatibility check!
[INFO] [MPM.PeriphManager] Device serial number: 3248EB5
[WARNING] [MPM.PeriphManager] Found more EEPROM paths than daughterboards.
Ignoring some of them.
[INFO] [MPM.RPCServer] RPC server ready!
[INFO] [MPM.RPCServer] Spawning watchdog task...
[ERROR] [MPMD] MPM minor compat number mismatch. Expected: 4.3 Actual: 4.2.
Please update the version of MPM on your USRP device.
Error: RuntimeError: MPM minor compat number mismatch. Expected: 4.3 Actual:
4.2. Please update the version of MPM on your USRP device.
Thinking it might be related to the FPGA image, I attempted to update it
using uhd_image_loader, which produced a similar error:
jjwhite@5cd01378zc:~$ uhd_image_loader --args type=e3xx,addr=192.168.1.174
[INFO] [UHD] linux; GNU C++ version 11.2.0; Boost_107400;
UHD_4.3.0.0-6-g5aa6bc44
[INFO] [MPMD] Initializing 1 device(s) in parallel with args:
mgmt_addr=192.168.1.174,type=e3xx,product=e310_sg3,serial=3248EB5,name=ni-e3
1x-3248EB5,fpga=n/a,claimed=False,skip_init=1
[INFO] [MPMD] Claimed device without full initialization.
[INFO] [MPMD IMAGE LOADER] Starting update. This may take a while.
[INFO] [MPM.PeriphManager] Installing component `fpga'
[INFO] [MPM.PeriphManager] Installing component `dts'
[INFO] [MPMD IMAGE LOADER] Update component function succeeded.
[INFO] [MPM.RPCServer] Resetting peripheral manager.
[WARNING] [MPM.PeriphManager] Skipping HW/SW compatibility check!
[INFO] [MPM.PeriphManager] Device serial number: 3248EB5
[WARNING] [MPM.PeriphManager] Found more EEPROM paths than daughterboards.
Ignoring some of them.
[INFO] [MPMD] Initializing 1 device(s) in parallel with args:
mgmt_addr=192.168.1.174,type=e3xx,product=e310_sg3,serial=3248EB5,name=ni-e3
1x-3248EB5,fpga=n/a,claimed=False,addr=192.168.1.174,find_all=1
[WARNING] [MPM.PeriphManager] Cannot run deinit(), device was never fully
initialized!
[ERROR] [MPMD] MPM minor compat number mismatch. Expected: 4.3 Actual: 4.2.
Please update the version of MPM on your USRP device.
Error: RuntimeError: MPM minor compat number mismatch. Expected: 4.3 Actual:
4.2. Please update the version of MPM on your USRP device.
Is there a reason that my host PC thinks the E312 has MPM v.4.2 installed
instead of 4.3? Does the UHD 4.3 image for the E312 come with MPM 4.2? If
so, is there a way to update it? Is there some other reason for the error,
and if so, is there a way to correct it? Thank you in advance for your time
and assistance.
Very respectfully,
2640 Hibiscus Way
Beavercreek, OH 45431
https://www.facebook.com/RiversideResearch/
https://twitter.com/RiversideRsch
https://www.linkedin.com/company/riverside-research
http://riversideresearch.org/ riversideresearch.org
Joshua White
Precision Timing Systems Engineer
Engineering & Support Solutions Directorate
phone: 937.986.3153
fax: 937.431.3811
This e-mail message, including any attachments, is for the sole use of the
intended recipient(s) and may contain proprietary, confidential or
privileged information or otherwise be protected by law. Any unauthorized
review, use, disclosure or distribution is prohibited. If you are not the
intended recipient, please notify the sender and destroy all copies and the
original message.
On 2022-10-24 12:55, White, Joshua J wrote:
All,
My company recently purchased an E312, which I have been attempting to
set up and test. I have UHD 4.3.0.0-6-g5aa6bc44 on my host PC and
downloaded and flashed the most recent sdimg from
https://files.ettus.com/binaries/cache/e3xx/ onto the E312, which is
UHD 4.3.0.0-0-g1f8fd345. Running uhd_usrp_probe on the E312 itself
over an SSH connection works as expected, but when I try to run
uhd_usrp_probe from the host PC, I get the following error:
jjwhite@5cd01378zc:~$ uhd_usrp_probe
[INFO] [UHD] linux; GNU C++ version 11.2.0; Boost_107400;
UHD_4.3.0.0-6-g5aa6bc44
[INFO] [MPMD] Initializing 1 device(s) in parallel with args:
mgmt_addr=192.168.1.174,type=e3xx,product=e310_sg3,serial=3248EB5,name=ni-e31x-3248EB5,fpga=n/a,claimed=False,addr=192.168.1.174
[INFO] [MPM.main] Launching USRP/MPM, version: 4.3.0.0-g1f8fd345
[INFO] [MPM.main] Spawning RPC process...
[WARNING] [MPM.PeriphManager] Skipping HW/SW compatibility check!
[INFO] [MPM.PeriphManager] Device serial number: 3248EB5
[WARNING] [MPM.PeriphManager] Found more EEPROM paths than
daughterboards. Ignoring some of them.
[INFO] [MPM.RPCServer] RPC server ready!
[INFO] [MPM.RPCServer] Spawning watchdog task...
[ERROR] [MPMD] MPM minor compat number mismatch. Expected: 4.3 Actual:
4.2. Please update the version of MPM on your USRP device.
Error: RuntimeError: MPM minor compat number mismatch. Expected: 4.3
Actual: 4.2. Please update the version of MPM on your USRP device.
Thinking it might be related to the FPGA image, I attempted to update
it using uhd_image_loader, which produced a similar error:
jjwhite@5cd01378zc:~$ uhd_image_loader --args type=e3xx,addr=192.168.1.174
[INFO] [UHD] linux; GNU C++ version 11.2.0; Boost_107400;
UHD_4.3.0.0-6-g5aa6bc44
[INFO] [MPMD] Initializing 1 device(s) in parallel with args:
mgmt_addr=192.168.1.174,type=e3xx,product=e310_sg3,serial=3248EB5,name=ni-e31x-3248EB5,fpga=n/a,claimed=False,skip_init=1
[INFO] [MPMD] Claimed device without full initialization.
[INFO] [MPMD IMAGE LOADER] Starting update. This may take a while.
[INFO] [MPM.PeriphManager] Installing component `fpga'
[INFO] [MPM.PeriphManager] Installing component `dts'
[INFO] [MPMD IMAGE LOADER] Update component function succeeded.
[INFO] [MPM.RPCServer] Resetting peripheral manager.
[WARNING] [MPM.PeriphManager] Skipping HW/SW compatibility check!
[INFO] [MPM.PeriphManager] Device serial number: 3248EB5
[WARNING] [MPM.PeriphManager] Found more EEPROM paths than
daughterboards. Ignoring some of them.
[INFO] [MPMD] Initializing 1 device(s) in parallel with args:
mgmt_addr=192.168.1.174,type=e3xx,product=e310_sg3,serial=3248EB5,name=ni-e31x-3248EB5,fpga=n/a,claimed=False,addr=192.168.1.174,find_all=1
[WARNING] [MPM.PeriphManager] Cannot run deinit(), device was never
fully initialized!
[ERROR] [MPMD] MPM minor compat number mismatch. Expected: 4.3 Actual:
4.2. Please update the version of MPM on your USRP device.
Error: RuntimeError: MPM minor compat number mismatch. Expected: 4.3
Actual: 4.2. Please update the version of MPM on your USRP device.
Is there a reason that my host PC thinks the E312 has MPM v.4.2
installed instead of 4.3? Does the UHD 4.3 image for the E312 come
with MPM 4.2? If so, is there a way to update it? Is there some other
reason for the error, and if so, is there a way to correct it? Thank
you in advance for your time and assistance.
Very respectfully,
Josh:
Could you get on to the E312 itself, and:
uhd_config_info --version
And share with us what it says?
Marcus,
This is the response I get from it.
root@ni-e31x-3248EB5:~# uhd_config_info --version
UHD 4.3.0.0-0-g1f8fd345
Very respectfully,
Joshua White
Precision Timing Systems Engineer
Engineering & Support Solutions Directorate
http://www.riversideresearch.org/ www.riversideresearch.org
T: 937.986.3153 | F: 937.431.3811
This e-mail message, including any attachments, is for the sole use of the
intended recipient(s) and may contain proprietary, confidential or privileged
information or otherwise be protected by law. Any unauthorized review, use,
disclosure or distribution is prohibited. If you are not the intended
recipient, please notify the sender and destroy all copies and the original
message.
From: Marcus D. Leech patchvonbraun@gmail.com
Sent: Monday, October 24, 2022 2:10 PM
To: usrp-users@lists.ettus.com
Subject: [USRP-users] Re: MPM compat number mismatch error with E312
On 2022-10-24 12:55, White, Joshua J wrote:
All,
My company recently purchased an E312, which I have been attempting to set up
and test. I have UHD 4.3.0.0-6-g5aa6bc44 on my host PC and downloaded and
flashed the most recent sdimg from
https://files.ettus.com/binaries/cache/e3xx/ onto the E312, which is UHD
4.3.0.0-0-g1f8fd345. Running uhd_usrp_probe on the E312 itself over an SSH
connection works as expected, but when I try to run uhd_usrp_probe from the
host PC, I get the following error:
jjwhite@5cd01378zc:~$ uhd_usrp_probe
[INFO] [UHD] linux; GNU C++ version 11.2.0; Boost_107400;
UHD_4.3.0.0-6-g5aa6bc44
[INFO] [MPMD] Initializing 1 device(s) in parallel with args:
mgmt_addr=192.168.1.174,type=e3xx,product=e310_sg3,serial=3248EB5,name=ni-e31x-3248EB5,fpga=n/a,claimed=False,addr=192.168.1.174
[INFO] [MPM.main] Launching USRP/MPM, version: 4.3.0.0-g1f8fd345
[INFO] [MPM.main] Spawning RPC process...
[WARNING] [MPM.PeriphManager] Skipping HW/SW compatibility check!
[INFO] [MPM.PeriphManager] Device serial number: 3248EB5
[WARNING] [MPM.PeriphManager] Found more EEPROM paths than daughterboards.
Ignoring some of them.
[INFO] [MPM.RPCServer] RPC server ready!
[INFO] [MPM.RPCServer] Spawning watchdog task...
[ERROR] [MPMD] MPM minor compat number mismatch. Expected: 4.3 Actual: 4.2.
Please update the version of MPM on your USRP device.
Error: RuntimeError: MPM minor compat number mismatch. Expected: 4.3 Actual:
4.2. Please update the version of MPM on your USRP device.
Thinking it might be related to the FPGA image, I attempted to update it using
uhd_image_loader, which produced a similar error:
jjwhite@5cd01378zc:~$ uhd_image_loader --args type=e3xx,addr=192.168.1.174
[INFO] [UHD] linux; GNU C++ version 11.2.0; Boost_107400;
UHD_4.3.0.0-6-g5aa6bc44
[INFO] [MPMD] Initializing 1 device(s) in parallel with args:
mgmt_addr=192.168.1.174,type=e3xx,product=e310_sg3,serial=3248EB5,name=ni-e31x-3248EB5,fpga=n/a,claimed=False,skip_init=1
[INFO] [MPMD] Claimed device without full initialization.
[INFO] [MPMD IMAGE LOADER] Starting update. This may take a while.
[INFO] [MPM.PeriphManager] Installing component `fpga'
[INFO] [MPM.PeriphManager] Installing component `dts'
[INFO] [MPMD IMAGE LOADER] Update component function succeeded.
[INFO] [MPM.RPCServer] Resetting peripheral manager.
[WARNING] [MPM.PeriphManager] Skipping HW/SW compatibility check!
[INFO] [MPM.PeriphManager] Device serial number: 3248EB5
[WARNING] [MPM.PeriphManager] Found more EEPROM paths than daughterboards.
Ignoring some of them.
[INFO] [MPMD] Initializing 1 device(s) in parallel with args:
mgmt_addr=192.168.1.174,type=e3xx,product=e310_sg3,serial=3248EB5,name=ni-e31x-3248EB5,fpga=n/a,claimed=False,addr=192.168.1.174,find_all=1
[WARNING] [MPM.PeriphManager] Cannot run deinit(), device was never fully
initialized!
[ERROR] [MPMD] MPM minor compat number mismatch. Expected: 4.3 Actual: 4.2.
Please update the version of MPM on your USRP device.
Error: RuntimeError: MPM minor compat number mismatch. Expected: 4.3 Actual:
4.2. Please update the version of MPM on your USRP device.
Is there a reason that my host PC thinks the E312 has MPM v.4.2 installed
instead of 4.3? Does the UHD 4.3 image for the E312 come with MPM 4.2? If so,
is there a way to update it? Is there some other reason for the error, and if
so, is there a way to correct it? Thank you in advance for your time and
assistance.
Very respectfully,
Josh:
Could you get on to the E312 itself, and:
uhd_config_info --version
And share with us what it says?
On 2022-10-24 14:14, White, Joshua J wrote:
Marcus,
This is the response I get from it.
root@ni-e31x-3248EB5:~# uhd_config_info --version
UHD 4.3.0.0-0-g1f8fd345
Very respectfully,
**
Joshua White
Precision Timing Systems Engineer
Engineering & Support Solutions Directorate
www.riversideresearch.org http://www.riversideresearch.org/
T: 937.986.3153 | F: 937.431.3811
Thanks.
This looks like a possible packaging error, then.
This e-mail message, including any attachments, is for the sole use of
the intended recipient(s) and may contain proprietary, confidential or
privileged information or otherwise be protected by law. Any
unauthorized review, use, disclosure or distribution is prohibited. If
you are not the intended recipient, please notify the sender and
destroy all copies and the original message.
From: Marcus D. Leech patchvonbraun@gmail.com
Sent: Monday, October 24, 2022 2:10 PM
To: usrp-users@lists.ettus.com
Subject: [USRP-users] Re: MPM compat number mismatch error with E312
On 2022-10-24 12:55, White, Joshua J wrote:
All,
My company recently purchased an E312, which I have been
attempting to set up and test. I have UHD 4.3.0.0-6-g5aa6bc44 on
my host PC and downloaded and flashed the most recent sdimg from
https://files.ettus.com/binaries/cache/e3xx/ onto the E312, which
is UHD 4.3.0.0-0-g1f8fd345. Running uhd_usrp_probe on the E312
itself over an SSH connection works as expected, but when I try to
run uhd_usrp_probe from the host PC, I get the following error:
jjwhite@5cd01378zc:~$ uhd_usrp_probe
[INFO] [UHD] linux; GNU C++ version 11.2.0; Boost_107400;
UHD_4.3.0.0-6-g5aa6bc44
[INFO] [MPMD] Initializing 1 device(s) in parallel with args:
mgmt_addr=192.168.1.174,type=e3xx,product=e310_sg3,serial=3248EB5,name=ni-e31x-3248EB5,fpga=n/a,claimed=False,addr=192.168.1.174
[INFO] [MPM.main] Launching USRP/MPM, version: 4.3.0.0-g1f8fd345
[INFO] [MPM.main] Spawning RPC process...
[WARNING] [MPM.PeriphManager] Skipping HW/SW compatibility check!
[INFO] [MPM.PeriphManager] Device serial number: 3248EB5
[WARNING] [MPM.PeriphManager] Found more EEPROM paths than
daughterboards. Ignoring some of them.
[INFO] [MPM.RPCServer] RPC server ready!
[INFO] [MPM.RPCServer] Spawning watchdog task...
[ERROR] [MPMD] MPM minor compat number mismatch. Expected: 4.3
Actual: 4.2. Please update the version of MPM on your USRP device.
Error: RuntimeError: MPM minor compat number mismatch. Expected:
4.3 Actual: 4.2. Please update the version of MPM on your USRP device.
Thinking it might be related to the FPGA image, I attempted to
update it using uhd_image_loader, which produced a similar error:
jjwhite@5cd01378zc:~$ uhd_image_loader --args
type=e3xx,addr=192.168.1.174
[INFO] [UHD] linux; GNU C++ version 11.2.0; Boost_107400;
UHD_4.3.0.0-6-g5aa6bc44
[INFO] [MPMD] Initializing 1 device(s) in parallel with args:
mgmt_addr=192.168.1.174,type=e3xx,product=e310_sg3,serial=3248EB5,name=ni-e31x-3248EB5,fpga=n/a,claimed=False,skip_init=1
[INFO] [MPMD] Claimed device without full initialization.
[INFO] [MPMD IMAGE LOADER] Starting update. This may take a while.
[INFO] [MPM.PeriphManager] Installing component `fpga'
[INFO] [MPM.PeriphManager] Installing component `dts'
[INFO] [MPMD IMAGE LOADER] Update component function succeeded.
[INFO] [MPM.RPCServer] Resetting peripheral manager.
[WARNING] [MPM.PeriphManager] Skipping HW/SW compatibility check!
[INFO] [MPM.PeriphManager] Device serial number: 3248EB5
[WARNING] [MPM.PeriphManager] Found more EEPROM paths than
daughterboards. Ignoring some of them.
[INFO] [MPMD] Initializing 1 device(s) in parallel with args:
mgmt_addr=192.168.1.174,type=e3xx,product=e310_sg3,serial=3248EB5,name=ni-e31x-3248EB5,fpga=n/a,claimed=False,addr=192.168.1.174,find_all=1
[WARNING] [MPM.PeriphManager] Cannot run deinit(), device was
never fully initialized!
[ERROR] [MPMD] MPM minor compat number mismatch. Expected: 4.3
Actual: 4.2. Please update the version of MPM on your USRP device.
Error: RuntimeError: MPM minor compat number mismatch. Expected:
4.3 Actual: 4.2. Please update the version of MPM on your USRP device.
Is there a reason that my host PC thinks the E312 has MPM v.4.2
installed instead of 4.3? Does the UHD 4.3 image for the E312 come
with MPM 4.2? If so, is there a way to update it? Is there some
other reason for the error, and if so, is there a way to correct
it? Thank you in advance for your time and assistance.
Very respectfully,
Josh:
Could you get on to the E312 itself, and:
uhd_config_info --version
And share with us what it says?
How should I go about fixing it?
Very respectfully,
Joshua White
Precision Timing Systems Engineer
Engineering & Support Solutions Directorate
http://www.riversideresearch.org/ www.riversideresearch.org
T: 937.986.3153 | F: 937.431.3811
This e-mail message, including any attachments, is for the sole use of the
intended recipient(s) and may contain proprietary, confidential or privileged
information or otherwise be protected by law. Any unauthorized review, use,
disclosure or distribution is prohibited. If you are not the intended
recipient, please notify the sender and destroy all copies and the original
message.
From: Marcus D. Leech patchvonbraun@gmail.com
Sent: Monday, October 24, 2022 2:18 PM
To: White, Joshua J jjwhite@RiversideResearch.org;
usrp-users@lists.ettus.com
Subject: Re: [USRP-users] Re: MPM compat number mismatch error with E312
On 2022-10-24 14:14, White, Joshua J wrote:
Marcus,
This is the response I get from it.
root@ni-e31x-3248EB5:~# uhd_config_info --version
UHD 4.3.0.0-0-g1f8fd345
Very respectfully,
Joshua White
Precision Timing Systems Engineer
Engineering & Support Solutions Directorate
http://www.riversideresearch.org/ www.riversideresearch.org
T: 937.986.3153 | F: 937.431.3811
Thanks.
This looks like a possible packaging error, then.
This e-mail message, including any attachments, is for the sole use of the
intended recipient(s) and may contain proprietary, confidential or privileged
information or otherwise be protected by law. Any unauthorized review, use,
disclosure or distribution is prohibited. If you are not the intended
recipient, please notify the sender and destroy all copies and the original
message.
From: Marcus D. Leech mailto:patchvonbraun@gmail.com
patchvonbraun@gmail.com
Sent: Monday, October 24, 2022 2:10 PM
To: usrp-users@lists.ettus.com mailto:usrp-users@lists.ettus.com
Subject: [USRP-users] Re: MPM compat number mismatch error with E312
On 2022-10-24 12:55, White, Joshua J wrote:
All,
My company recently purchased an E312, which I have been attempting to set up
and test. I have UHD 4.3.0.0-6-g5aa6bc44 on my host PC and downloaded and
flashed the most recent sdimg from
https://files.ettus.com/binaries/cache/e3xx/ onto the E312, which is UHD
4.3.0.0-0-g1f8fd345. Running uhd_usrp_probe on the E312 itself over an SSH
connection works as expected, but when I try to run uhd_usrp_probe from the
host PC, I get the following error:
jjwhite@5cd01378zc:~$ uhd_usrp_probe
[INFO] [UHD] linux; GNU C++ version 11.2.0; Boost_107400;
UHD_4.3.0.0-6-g5aa6bc44
[INFO] [MPMD] Initializing 1 device(s) in parallel with args:
mgmt_addr=192.168.1.174,type=e3xx,product=e310_sg3,serial=3248EB5,name=ni-e31x-3248EB5,fpga=n/a,claimed=False,addr=192.168.1.174
[INFO] [MPM.main] Launching USRP/MPM, version: 4.3.0.0-g1f8fd345
[INFO] [MPM.main] Spawning RPC process...
[WARNING] [MPM.PeriphManager] Skipping HW/SW compatibility check!
[INFO] [MPM.PeriphManager] Device serial number: 3248EB5
[WARNING] [MPM.PeriphManager] Found more EEPROM paths than daughterboards.
Ignoring some of them.
[INFO] [MPM.RPCServer] RPC server ready!
[INFO] [MPM.RPCServer] Spawning watchdog task...
[ERROR] [MPMD] MPM minor compat number mismatch. Expected: 4.3 Actual: 4.2.
Please update the version of MPM on your USRP device.
Error: RuntimeError: MPM minor compat number mismatch. Expected: 4.3 Actual:
4.2. Please update the version of MPM on your USRP device.
Thinking it might be related to the FPGA image, I attempted to update it using
uhd_image_loader, which produced a similar error:
jjwhite@5cd01378zc:~$ uhd_image_loader --args type=e3xx,addr=192.168.1.174
[INFO] [UHD] linux; GNU C++ version 11.2.0; Boost_107400;
UHD_4.3.0.0-6-g5aa6bc44
[INFO] [MPMD] Initializing 1 device(s) in parallel with args:
mgmt_addr=192.168.1.174,type=e3xx,product=e310_sg3,serial=3248EB5,name=ni-e31x-3248EB5,fpga=n/a,claimed=False,skip_init=1
[INFO] [MPMD] Claimed device without full initialization.
[INFO] [MPMD IMAGE LOADER] Starting update. This may take a while.
[INFO] [MPM.PeriphManager] Installing component `fpga'
[INFO] [MPM.PeriphManager] Installing component `dts'
[INFO] [MPMD IMAGE LOADER] Update component function succeeded.
[INFO] [MPM.RPCServer] Resetting peripheral manager.
[WARNING] [MPM.PeriphManager] Skipping HW/SW compatibility check!
[INFO] [MPM.PeriphManager] Device serial number: 3248EB5
[WARNING] [MPM.PeriphManager] Found more EEPROM paths than daughterboards.
Ignoring some of them.
[INFO] [MPMD] Initializing 1 device(s) in parallel with args:
mgmt_addr=192.168.1.174,type=e3xx,product=e310_sg3,serial=3248EB5,name=ni-e31x-3248EB5,fpga=n/a,claimed=False,addr=192.168.1.174,find_all=1
[WARNING] [MPM.PeriphManager] Cannot run deinit(), device was never fully
initialized!
[ERROR] [MPMD] MPM minor compat number mismatch. Expected: 4.3 Actual: 4.2.
Please update the version of MPM on your USRP device.
Error: RuntimeError: MPM minor compat number mismatch. Expected: 4.3 Actual:
4.2. Please update the version of MPM on your USRP device.
Is there a reason that my host PC thinks the E312 has MPM v.4.2 installed
instead of 4.3? Does the UHD 4.3 image for the E312 come with MPM 4.2? If so,
is there a way to update it? Is there some other reason for the error, and if
so, is there a way to correct it? Thank you in advance for your time and
assistance.
Very respectfully,
Josh:
Could you get on to the E312 itself, and:
uhd_config_info --version
And share with us what it says?
On 2022-10-24 14:43, White, Joshua J wrote:
How should I go about fixing it?
Very respectfully,
**
Joshua White
Precision Timing Systems Engineer
Engineering & Support Solutions Directorate
www.riversideresearch.org http://www.riversideresearch.org/
T: 937.986.3153 | F: 937.431.3811
It looks like on the host-side, you're using a HEAD version of UHD,
rather than a tagged version.
The current "HEAD" looks for a different compat number.
I'd recommend building from a tagged release. This came to light after
I chatted briefly with Ettus R&D.
So:
git checkout v4.3.0.0
And rebuild on the host side
This e-mail message, including any attachments, is for the sole use of
the intended recipient(s) and may contain proprietary, confidential or
privileged information or otherwise be protected by law. Any
unauthorized review, use, disclosure or distribution is prohibited. If
you are not the intended recipient, please notify the sender and
destroy all copies and the original message.
From: Marcus D. Leech patchvonbraun@gmail.com
Sent: Monday, October 24, 2022 2:18 PM
To: White, Joshua J jjwhite@RiversideResearch.org;
usrp-users@lists.ettus.com
Subject: Re: [USRP-users] Re: MPM compat number mismatch error with E312
On 2022-10-24 14:14, White, Joshua J wrote:
Marcus,
This is the response I get from it.
root@ni-e31x-3248EB5:~# uhd_config_info --version
UHD 4.3.0.0-0-g1f8fd345
Very respectfully,
**
*Joshua White*
Precision Timing Systems Engineer
Engineering & Support Solutions Directorate
www.riversideresearch.org <http://www.riversideresearch.org/>
T: 937.986.3153 | F: 937.431.3811
Thanks.
This looks like a possible packaging error, then.
This e-mail message, including any attachments, is for the sole
use of the intended recipient(s) and may contain proprietary,
confidential or privileged information or otherwise be protected
by law. Any unauthorized review, use, disclosure or distribution
is prohibited. If you are not the intended recipient, please
notify the sender and destroy all copies and the original message.
*From:* Marcus D. Leech <patchvonbraun@gmail.com>
<mailto:patchvonbraun@gmail.com>
*Sent:* Monday, October 24, 2022 2:10 PM
*To:* usrp-users@lists.ettus.com
*Subject:* [USRP-users] Re: MPM compat number mismatch error with E312
On 2022-10-24 12:55, White, Joshua J wrote:
All,
My company recently purchased an E312, which I have been
attempting to set up and test. I have UHD 4.3.0.0-6-g5aa6bc44
on my host PC and downloaded and flashed the most recent sdimg
from https://files.ettus.com/binaries/cache/e3xx/ onto the
E312, which is UHD 4.3.0.0-0-g1f8fd345. Running uhd_usrp_probe
on the E312 itself over an SSH connection works as expected,
but when I try to run uhd_usrp_probe from the host PC, I get
the following error:
jjwhite@5cd01378zc:~$ uhd_usrp_probe
[INFO] [UHD] linux; GNU C++ version 11.2.0; Boost_107400;
UHD_4.3.0.0-6-g5aa6bc44
[INFO] [MPMD] Initializing 1 device(s) in parallel with args:
mgmt_addr=192.168.1.174,type=e3xx,product=e310_sg3,serial=3248EB5,name=ni-e31x-3248EB5,fpga=n/a,claimed=False,addr=192.168.1.174
[INFO] [MPM.main] Launching USRP/MPM, version: 4.3.0.0-g1f8fd345
[INFO] [MPM.main] Spawning RPC process...
[WARNING] [MPM.PeriphManager] Skipping HW/SW compatibility check!
[INFO] [MPM.PeriphManager] Device serial number: 3248EB5
[WARNING] [MPM.PeriphManager] Found more EEPROM paths than
daughterboards. Ignoring some of them.
[INFO] [MPM.RPCServer] RPC server ready!
[INFO] [MPM.RPCServer] Spawning watchdog task...
[ERROR] [MPMD] MPM minor compat number mismatch. Expected: 4.3
Actual: 4.2. Please update the version of MPM on your USRP device.
Error: RuntimeError: MPM minor compat number mismatch.
Expected: 4.3 Actual: 4.2. Please update the version of MPM on
your USRP device.
Thinking it might be related to the FPGA image, I attempted to
update it using uhd_image_loader, which produced a similar error:
jjwhite@5cd01378zc:~$ uhd_image_loader --args
type=e3xx,addr=192.168.1.174
[INFO] [UHD] linux; GNU C++ version 11.2.0; Boost_107400;
UHD_4.3.0.0-6-g5aa6bc44
[INFO] [MPMD] Initializing 1 device(s) in parallel with args:
mgmt_addr=192.168.1.174,type=e3xx,product=e310_sg3,serial=3248EB5,name=ni-e31x-3248EB5,fpga=n/a,claimed=False,skip_init=1
[INFO] [MPMD] Claimed device without full initialization.
[INFO] [MPMD IMAGE LOADER] Starting update. This may take a while.
[INFO] [MPM.PeriphManager] Installing component `fpga'
[INFO] [MPM.PeriphManager] Installing component `dts'
[INFO] [MPMD IMAGE LOADER] Update component function succeeded.
[INFO] [MPM.RPCServer] Resetting peripheral manager.
[WARNING] [MPM.PeriphManager] Skipping HW/SW compatibility check!
[INFO] [MPM.PeriphManager] Device serial number: 3248EB5
[WARNING] [MPM.PeriphManager] Found more EEPROM paths than
daughterboards. Ignoring some of them.
[INFO] [MPMD] Initializing 1 device(s) in parallel with args:
mgmt_addr=192.168.1.174,type=e3xx,product=e310_sg3,serial=3248EB5,name=ni-e31x-3248EB5,fpga=n/a,claimed=False,addr=192.168.1.174,find_all=1
[WARNING] [MPM.PeriphManager] Cannot run deinit(), device was
never fully initialized!
[ERROR] [MPMD] MPM minor compat number mismatch. Expected: 4.3
Actual: 4.2. Please update the version of MPM on your USRP device.
Error: RuntimeError: MPM minor compat number mismatch.
Expected: 4.3 Actual: 4.2. Please update the version of MPM on
your USRP device.
Is there a reason that my host PC thinks the E312 has MPM
v.4.2 installed instead of 4.3? Does the UHD 4.3 image for the
E312 come with MPM 4.2? If so, is there a way to update it? Is
there some other reason for the error, and if so, is there a
way to correct it? Thank you in advance for your time and
assistance.
Very respectfully,
Josh:
Could you get on to the E312 itself, and:
uhd_config_info --version
And share with us what it says?
OK thanks I’ll give that a try
Very respectfully,
Joshua White
Precision Timing Systems Engineer
Engineering & Support Solutions Directorate
http://www.riversideresearch.org/ www.riversideresearch.org
T: 937.986.3153 | F: 937.431.3811
This e-mail message, including any attachments, is for the sole use of the intended recipient(s) and may contain proprietary, confidential or privileged information or otherwise be protected by law. Any unauthorized review, use, disclosure or distribution is prohibited. If you are not the intended recipient, please notify the sender and destroy all copies and the original message.
From: Marcus D. Leech patchvonbraun@gmail.com
Sent: Monday, October 24, 2022 2:46 PM
To: White, Joshua J jjwhite@RiversideResearch.org; usrp-users@lists.ettus.com
Subject: Re: [USRP-users] Re: MPM compat number mismatch error with E312
On 2022-10-24 14:43, White, Joshua J wrote:
How should I go about fixing it?
Very respectfully,
Joshua White
Precision Timing Systems Engineer
Engineering & Support Solutions Directorate
http://www.riversideresearch.org/ www.riversideresearch.org
T: 937.986.3153 | F: 937.431.3811
It looks like on the host-side, you're using a HEAD version of UHD, rather than a tagged version.
The current "HEAD" looks for a different compat number.
I'd recommend building from a tagged release. This came to light after I chatted briefly with Ettus R&D.
So:
git checkout v4.3.0.0
And rebuild on the host side
This e-mail message, including any attachments, is for the sole use of the intended recipient(s) and may contain proprietary, confidential or privileged information or otherwise be protected by law. Any unauthorized review, use, disclosure or distribution is prohibited. If you are not the intended recipient, please notify the sender and destroy all copies and the original message.
From: Marcus D. Leech mailto:patchvonbraun@gmail.com patchvonbraun@gmail.com
Sent: Monday, October 24, 2022 2:18 PM
To: White, Joshua J mailto:jjwhite@RiversideResearch.org jjwhite@RiversideResearch.org; usrp-users@lists.ettus.com mailto:usrp-users@lists.ettus.com
Subject: Re: [USRP-users] Re: MPM compat number mismatch error with E312
On 2022-10-24 14:14, White, Joshua J wrote:
Marcus,
This is the response I get from it.
root@ni-e31x-3248EB5:~# uhd_config_info --version
UHD 4.3.0.0-0-g1f8fd345
Very respectfully,
Joshua White
Precision Timing Systems Engineer
Engineering & Support Solutions Directorate
http://www.riversideresearch.org/ www.riversideresearch.org
T: 937.986.3153 | F: 937.431.3811
Thanks.
This looks like a possible packaging error, then.
This e-mail message, including any attachments, is for the sole use of the intended recipient(s) and may contain proprietary, confidential or privileged information or otherwise be protected by law. Any unauthorized review, use, disclosure or distribution is prohibited. If you are not the intended recipient, please notify the sender and destroy all copies and the original message.
From: Marcus D. Leech mailto:patchvonbraun@gmail.com patchvonbraun@gmail.com
Sent: Monday, October 24, 2022 2:10 PM
To: usrp-users@lists.ettus.com mailto:usrp-users@lists.ettus.com
Subject: [USRP-users] Re: MPM compat number mismatch error with E312
On 2022-10-24 12:55, White, Joshua J wrote:
All,
My company recently purchased an E312, which I have been attempting to set up and test. I have UHD 4.3.0.0-6-g5aa6bc44 on my host PC and downloaded and flashed the most recent sdimg from https://files.ettus.com/binaries/cache/e3xx/ onto the E312, which is UHD 4.3.0.0-0-g1f8fd345. Running uhd_usrp_probe on the E312 itself over an SSH connection works as expected, but when I try to run uhd_usrp_probe from the host PC, I get the following error:
jjwhite@5cd01378zc:~$ uhd_usrp_probe
[INFO] [UHD] linux; GNU C++ version 11.2.0; Boost_107400; UHD_4.3.0.0-6-g5aa6bc44
[INFO] [MPMD] Initializing 1 device(s) in parallel with args: mgmt_addr=192.168.1.174,type=e3xx,product=e310_sg3,serial=3248EB5,name=ni-e31x-3248EB5,fpga=n/a,claimed=False,addr=192.168.1.174
[INFO] [MPM.main] Launching USRP/MPM, version: 4.3.0.0-g1f8fd345
[INFO] [MPM.main] Spawning RPC process...
[WARNING] [MPM.PeriphManager] Skipping HW/SW compatibility check!
[INFO] [MPM.PeriphManager] Device serial number: 3248EB5
[WARNING] [MPM.PeriphManager] Found more EEPROM paths than daughterboards. Ignoring some of them.
[INFO] [MPM.RPCServer] RPC server ready!
[INFO] [MPM.RPCServer] Spawning watchdog task...
[ERROR] [MPMD] MPM minor compat number mismatch. Expected: 4.3 Actual: 4.2. Please update the version of MPM on your USRP device.
Error: RuntimeError: MPM minor compat number mismatch. Expected: 4.3 Actual: 4.2. Please update the version of MPM on your USRP device.
Thinking it might be related to the FPGA image, I attempted to update it using uhd_image_loader, which produced a similar error:
jjwhite@5cd01378zc:~$ uhd_image_loader --args type=e3xx,addr=192.168.1.174
[INFO] [UHD] linux; GNU C++ version 11.2.0; Boost_107400; UHD_4.3.0.0-6-g5aa6bc44
[INFO] [MPMD] Initializing 1 device(s) in parallel with args: mgmt_addr=192.168.1.174,type=e3xx,product=e310_sg3,serial=3248EB5,name=ni-e31x-3248EB5,fpga=n/a,claimed=False,skip_init=1
[INFO] [MPMD] Claimed device without full initialization.
[INFO] [MPMD IMAGE LOADER] Starting update. This may take a while.
[INFO] [MPM.PeriphManager] Installing component `fpga'
[INFO] [MPM.PeriphManager] Installing component `dts'
[INFO] [MPMD IMAGE LOADER] Update component function succeeded.
[INFO] [MPM.RPCServer] Resetting peripheral manager.
[WARNING] [MPM.PeriphManager] Skipping HW/SW compatibility check!
[INFO] [MPM.PeriphManager] Device serial number: 3248EB5
[WARNING] [MPM.PeriphManager] Found more EEPROM paths than daughterboards. Ignoring some of them.
[INFO] [MPMD] Initializing 1 device(s) in parallel with args: mgmt_addr=192.168.1.174,type=e3xx,product=e310_sg3,serial=3248EB5,name=ni-e31x-3248EB5,fpga=n/a,claimed=False,addr=192.168.1.174,find_all=1
[WARNING] [MPM.PeriphManager] Cannot run deinit(), device was never fully initialized!
[ERROR] [MPMD] MPM minor compat number mismatch. Expected: 4.3 Actual: 4.2. Please update the version of MPM on your USRP device.
Error: RuntimeError: MPM minor compat number mismatch. Expected: 4.3 Actual: 4.2. Please update the version of MPM on your USRP device.
Is there a reason that my host PC thinks the E312 has MPM v.4.2 installed instead of 4.3? Does the UHD 4.3 image for the E312 come with MPM 4.2? If so, is there a way to update it? Is there some other reason for the error, and if so, is there a way to correct it? Thank you in advance for your time and assistance.
Very respectfully,
Josh:
Could you get on to the E312 itself, and:
uhd_config_info --version
And share with us what it says?