I just received a WWV receiver and its starting to work. The input filter cap was a dead short. Meter select switches are sticky and lossy. The receiver sounds quite good. But there are still other issues. Back in 2019 there was a single post from Canada asking for a manual. That person said they had a schematic. Does anyone have the schematics please. I suspect there is one per board and about 7 small boards. Most are not complex. Appreciate any help. Oh for the good ole days of Artek... Regards Paul WB8TSL

There is a individual on Utube Mr. Carlson lab (Canadian), if anyone has the schematic he probably would. He repairs all of this old stuff. His videos are great as well. -=Bryan=- ________________________________ From: paul swed via time-nuts <time-nuts@lists.febo.com> Sent: June 9, 2023 8:10 AM To: Time-nuts <time-nuts@lists.febo.com> Cc: paul swed <paulswedb@gmail.com> Subject: [time-nuts] Kinnemetrics/truetime WVTR Mark IV wwv receiver manual or schematics I just received a WWV receiver and its starting to work. The input filter cap was a dead short. Meter select switches are sticky and lossy. The receiver sounds quite good. But there are still other issues. Back in 2019 there was a single post from Canada asking for a manual. That person said they had a schematic. Does anyone have the schematics please. I suspect there is one per board and about 7 small boards. Most are not complex. Appreciate any help. Oh for the good ole days of Artek... Regards Paul WB8TSL _______________________________________________ time-nuts mailing list -- time-nuts@lists.febo.com To unsubscribe send an email to time-nuts-leave@lists.febo.com

Thanks Bryan and he does a great job of it. There had been a post T+N but 4 years ago is a long time. They had the schematic but no manual. odd to say the least. I actually have a Mark 5 manual and unit that works. Its way different then the Mark 4. Lets see if anyone else has a answer. Appreciate your response. Paul On Fri, Jun 9, 2023 at 6:24 PM Bryan _ via time-nuts < time-nuts@lists.febo.com> wrote: > There is a individual on Utube Mr. Carlson lab (Canadian), if anyone has > the schematic he probably would. He repairs all of this old stuff. His > videos are great as well. > > -=Bryan=- > ________________________________ > From: paul swed via time-nuts <time-nuts@lists.febo.com> > Sent: June 9, 2023 8:10 AM > To: Time-nuts <time-nuts@lists.febo.com> > Cc: paul swed <paulswedb@gmail.com> > Subject: [time-nuts] Kinnemetrics/truetime WVTR Mark IV wwv receiver > manual or schematics > > I just received a WWV receiver and its starting to work. The input filter > cap was a dead short. > Meter select switches are sticky and lossy. > The receiver sounds quite good. But there are still other issues. > Back in 2019 there was a single post from Canada asking for a manual. That > person said they had a schematic. > Does anyone have the schematics please. I suspect there is one per board > and about 7 small boards. Most are not complex. > Appreciate any help. > Oh for the good ole days of Artek... > Regards > Paul > WB8TSL > _______________________________________________ > time-nuts mailing list -- time-nuts@lists.febo.com > To unsubscribe send an email to time-nuts-leave@lists.febo.com > _______________________________________________ > time-nuts mailing list -- time-nuts@lists.febo.com > To unsubscribe send an email to time-nuts-leave@lists.febo.com >

Yes, he is very meticulous and attention to detail second to none. -=Bryan=- ________________________________ From: paul swed via time-nuts <time-nuts@lists.febo.com> Sent: June 9, 2023 3:35 PM To: Discussion of precise time and frequency measurement <time-nuts@lists.febo.com> Cc: paul swed <paulswedb@gmail.com> Subject: [time-nuts] Re: Kinnemetrics/truetime WVTR Mark IV wwv receiver manual or schematics Thanks Bryan and he does a great job of it. There had been a post T+N but 4 years ago is a long time. They had the schematic but no manual. odd to say the least. I actually have a Mark 5 manual and unit that works. Its way different then the Mark 4. Lets see if anyone else has a answer. Appreciate your response. Paul On Fri, Jun 9, 2023 at 6:24 PM Bryan _ via time-nuts < time-nuts@lists.febo.com> wrote: > There is a individual on Utube Mr. Carlson lab (Canadian), if anyone has > the schematic he probably would. He repairs all of this old stuff. His > videos are great as well. > > -=Bryan=- > ________________________________ > From: paul swed via time-nuts <time-nuts@lists.febo.com> > Sent: June 9, 2023 8:10 AM > To: Time-nuts <time-nuts@lists.febo.com> > Cc: paul swed <paulswedb@gmail.com> > Subject: [time-nuts] Kinnemetrics/truetime WVTR Mark IV wwv receiver > manual or schematics > > I just received a WWV receiver and its starting to work. The input filter > cap was a dead short. > Meter select switches are sticky and lossy. > The receiver sounds quite good. But there are still other issues. > Back in 2019 there was a single post from Canada asking for a manual. That > person said they had a schematic. > Does anyone have the schematics please. I suspect there is one per board > and about 7 small boards. Most are not complex. > Appreciate any help. > Oh for the good ole days of Artek... > Regards > Paul > WB8TSL > _______________________________________________ > time-nuts mailing list -- time-nuts@lists.febo.com > To unsubscribe send an email to time-nuts-leave@lists.febo.com > _______________________________________________ > time-nuts mailing list -- time-nuts@lists.febo.com > To unsubscribe send an email to time-nuts-leave@lists.febo.com > _______________________________________________ time-nuts mailing list -- time-nuts@lists.febo.com To unsubscribe send an email to time-nuts-leave@lists.febo.com