Hi, I am trying to work with the latest SVN (wince_demos project). I am not being able to use any of the GSM, PCMU, PCMA codecs (I was able to do so with no problems using the 0.8.0 package and a couple of later SVN versions (few weeks ago not sure when exactly)). Anyway, currently I am getting the following in the pjsua log file: strm002980A4 Codec encode() error: Codec internal creation error (PJMEDIA_CODEC_EFAILED) [err:220081] (I am currently working with SVN of today but the problem was encountered throughout past week) Attached is the complete log file of this scenario. Thanks, Ramzi Ramzi T. Touma Electrical and Computer Engineering American University of Beirut P.O. Box 11-0236/ 5555 Riad el Solh Square 1107 - 2020 Email: <http://lists.pjsip.org/mailman/listinfo/pjsip_lists.pjsip.org> rtt00@aub.edu.lb

 /* Encode to temporary buffer */

Hi Ramzi, Here are some notes from the log file: 1. The log file says the call was using G.722 codec which may not be preferred. To completely disable G.722 please specify "#define PJMEDIA_HAS_G722_CODEC 0" for WINCE build in the config_site.h/config_site_sample.h, or you can always lower the priority of G.722 using pjsua_codec_set_priority() in the pjsua_wince.cpp. 2. There seems to be a bug in g722.c (error PJMEDIA_CODEC_EFAILED), the patch below should fix it (please try it and drop some feedback, since I haven't been able to reproduce the error). Moreover, assumed caller and callee share the same source code: 3. The caller was not offering PCMU/PCMA in the INVITE, it seems to be disabled on purpose since it is enabled by default. 4. GSM seems to be there, it just had a lower priority than G.722, so it was not chosen. ---- begin of patch ---- Index: pjmedia/src/pjmedia-codec/g722.c =================================================================== --- pjmedia/src/pjmedia-codec/g722.c (revision 1964) +++ pjmedia/src/pjmedia-codec/g722.c (working copy) @@ -568,6 +568,7 @@ } /* Encode to temporary buffer */ + output->size = output_buf_len; status = g722_enc_encode(&g722_data->encoder, (pj_int16_t*)input->buf, SAMPLES_PER_FRAME, output->buf, &output->size); if (status != PJ_SUCCESS) { ---- end of patch ---- Thanks for the report. Regards, nanang 2008/5/26 Ramzi Touma <rtt00@aub.edu.lb>: > Hi, > > I am trying to work with the latest SVN (wince_demos project). I am not > being able to use any of the GSM, PCMU, PCMA codecs (I was able to do so > with no problems using the 0.8.0 package and a couple of later SVN versions > (few weeks ago not sure when exactly)). Anyway, currently I am getting the > following in the pjsua log file: > > > > strm002980A4 Codec encode() error: Codec internal creation error > (PJMEDIA_CODEC_EFAILED) [err:220081] > > > > (I am currently working with SVN of today but the problem was encountered > throughout past week) > > > > Attached is the complete log file of this scenario. > > > > Thanks, > > Ramzi > > > > > > Ramzi T. Touma > > Electrical and Computer Engineering > > American University of Beirut > > P.O. Box 11-0236/ 5555 > > Riad el Solh Square 1107 - 2020 > > Email: rtt00@aub.edu.lb > > > > _______________________________________________ > Visit our blog: http://blog.pjsip.org > > pjsip mailing list > pjsip@lists.pjsip.org > http://lists.pjsip.org/mailman/listinfo/pjsip_lists.pjsip.org > >