Artekmedia has a very nicely scanned manual for about $10.
There's also a copy floating around on one of the member's sites, but I
don't remember which one offhand. A Google search and some persistence
will locate it.

Along these lines, none of the manuals I've found cover the late-model
DC oven controller, which one of my clocks has.
Anyone have any leads on a schematic?

Bill Ezell

They said 'Windows or better'
so I used Linux.

J. L. Trantham wrote:

Found it!

I looked on the Artek Media website but did not see it listed.  However, I
did find it at http://www.leapsecond.com/museum/hp5061a/5061a.pdf.  What a
resource that is!  Thanks Tom.

I just didn't know how to search the archives of the mailing list.  When I
figured that out, I saw the link.

Joe

-----Original Message-----
From: time-nuts-bounces@febo.com [mailto:time-nuts-bounces@febo.com] On
Behalf Of wje
Sent: Monday, November 17, 2008 6:11 AM
To: Discussion of precise time and frequency measurement
Subject: Re: [time-nuts] 5061A Manual

Artekmedia has a very nicely scanned manual for about $10.
There's also a copy floating around on one of the member's sites, but I
don't remember which one offhand. A Google search and some persistence
will locate it.

Along these lines, none of the manuals I've found cover the late-model
DC oven controller, which one of my clocks has.
Anyone have any leads on a schematic?

Bill Ezell

They said 'Windows or better'
so I used Linux.

J. L. Trantham wrote:

https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts

time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to
https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.

Hi Joe;
I think I have a hard copy I can send you to use or copy if you can't
find a PDF.
Best Wishes;
Thomas Knox
NIST
4475 Whitney Place
Boulder Colorado 80305
1-303-554-0307
tomknox@nist.gov

Quoting "J. L. Trantham" jltran@worldnet.att.net:

Tom,

Thanks for the offer but I found a .PDF copy at leapsecond.com.  It just
took a while to chase down.

Once I get several other projects put to bed, I will be opening up that can
of worms and will very likely be back seeking all kinds of help.  It was
advertised a having all sorts of problems and may turn out to be just a
great source of spare parts.  However the price was too good to pass up.

Joe

-----Original Message-----
From: time-nuts-bounces@febo.com [mailto:time-nuts-bounces@febo.com] On
Behalf Of tomknox@nist.gov
Sent: Monday, November 17, 2008 2:08 PM
To: Discussion of precise time and frequency measurement
Subject: Re: [time-nuts] 5061A Manual

Hi Joe;
I think I have a hard copy I can send you to use or copy if you can't
find a PDF.
Best Wishes;
Thomas Knox
NIST
4475 Whitney Place
Boulder Colorado 80305
1-303-554-0307
tomknox@nist.gov

Quoting "J. L. Trantham" jltran@worldnet.att.net:

https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts

time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to
https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.