Hi: I'm working on selling my FTS4060/S24 that was broken by the shipper and would like to know the pin outs for the Datum 1000B 10 MHz crystal oscillator, since it's working. It's frequency can be controlled by using the manual scan control voltage increase/decrease toggle switch. Thanks, Brooke Clarke, N6GCE -- w/Java http://www.PRC68.com w/o Java http://www.pacificsites.com/~brooke/PRC68COM.shtml http://www.precisionclock.com

    Björn

We had a thread about FTS-1200 a few weeks ago. The old FTS 1000 series includes the models 1000A, 1200, 1002A and 1003A. In case they preserved the pinout to the 1000B, you might try #1 GND, #2 EFC, #3,4 NC, #5 GND, #6 Oven monitor, #7 NC, #8 22-30VDC, #9 NC. -- Björn Brooke Clarke <brooke@pacific.net> writes: > Hi: > > I'm working on selling my FTS4060/S24 that was broken by the shipper > and would like to know the pin outs for the Datum 1000B 10 MHz crystal > oscillator, since it's working. It's frequency can be controlled by > using the manual scan control voltage increase/decrease toggle switch. > > Thanks, > > Brooke Clarke, N6GCE > -- > w/Java http://www.PRC68.com > w/o Java http://www.pacificsites.com/~brooke/PRC68COM.shtml > http://www.precisionclock.com > > > _______________________________________________ > time-nuts mailing list > time-nuts@febo.com > https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts

The 1000B is still in production. Here's a link to the product folder: http://www.symmttm.com/products_pfr_1000B.asp It's no longer the standard oscillator in cesium products but can be found in the MHM-2010 hydrogen maser and the 1050A rackmount OCXO instrument. -RL ------------------------------------------------------------ Robert Lutwak, Senior Scientist Symmetricom - Technology Realization Center 34 Tozer Rd. Beverly, MA 01915 (978) 232-1461 Voice RLutwak@Symmetricom.com (Business) (978) 927-4099 FAX Lutwak@Alum.MIT.edu (Personal) (339) 927-7896 Mobile ----- Original Message ----- From: "Brooke Clarke" <brooke@pacific.net> To: "Discussion of precise time and frequency measurement" <time-nuts@febo.com> Sent: Tuesday, July 19, 2005 5:46 PM Subject: [time-nuts] Datum 1000B 10 MHz Oscillator pinouts for the DB-9connector? > Hi: > > I'm working on selling my FTS4060/S24 that was broken by the shipper and > would like to know the pin outs for the Datum 1000B 10 MHz crystal > oscillator, since it's working. It's frequency can be controlled by using > the manual scan control voltage increase/decrease toggle switch. > > Thanks, > > Brooke Clarke, N6GCE > -- > w/Java http://www.PRC68.com > w/o Java http://www.pacificsites.com/~brooke/PRC68COM.shtml > http://www.precisionclock.com > > > _______________________________________________ > time-nuts mailing list > time-nuts@febo.com > https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts

Hello Robert, Nice to see you on the list. Un fortunately the referenced Web page does not show the 1000B DB-9 pin out which is what really started this thread. Can you help? Best Regards, Hadley At 02:24 AM 7/20/2005, you wrote: >The 1000B is still in production. Here's a link to the product folder: > >http://www.symmttm.com/products_pfr_1000B.asp > >It's no longer the standard oscillator in cesium products but can be found >in the MHM-2010 hydrogen maser and the 1050A rackmount OCXO instrument. > > >-RL > >------------------------------------------------------------ >Robert Lutwak, Senior Scientist >Symmetricom - Technology Realization Center >34 Tozer Rd. >Beverly, MA 01915 >(978) 232-1461 Voice RLutwak@Symmetricom.com (Business) >(978) 927-4099 FAX Lutwak@Alum.MIT.edu (Personal) >(339) 927-7896 Mobile > >----- Original Message ----- From: "Brooke Clarke" <brooke@pacific.net> >To: "Discussion of precise time and frequency measurement" ><time-nuts@febo.com> >Sent: Tuesday, July 19, 2005 5:46 PM >Subject: [time-nuts] Datum 1000B 10 MHz Oscillator pinouts for the >DB-9connector? > > >>Hi: >> >>I'm working on selling my FTS4060/S24 that was broken by the shipper and >>would like to know the pin outs for the Datum 1000B 10 MHz crystal >>oscillator, since it's working. It's frequency can be controlled by >>using the manual scan control voltage increase/decrease toggle switch. >> >>Thanks, >> >>Brooke Clarke, N6GCE >>-- >>w/Java http://www.PRC68.com >>w/o Java http://www.pacificsites.com/~brooke/PRC68COM.shtml >>http://www.precisionclock.com >> >> >>_______________________________________________ >>time-nuts mailing list >>time-nuts@febo.com >>https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > > > >_______________________________________________ >time-nuts mailing list >time-nuts@febo.com >https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts