Empathy List Archives

time-nuts@lists.febo.com

Discussion of precise time and frequency measurement

View all threads

10 MHz Oscillators

Martyn Smith

Wed, Dec 3, 2014 9:38 AM

Hello,

Ulrich was asking about 10 MHz oscillators.

We make a 10 MHz OXCO that has –118 dBc @ 1 Hz with a –175 dBc noise floor.

Not cheap though.

Also Low G sensitive oscillators. 5 x 10E-11/g.

Contact me off list as I’m trying not to advertise on this forum.

Best Regards

Martyn

martyn@ptsyst.com

Hello, Ulrich was asking about 10 MHz oscillators. We make a 10 MHz OXCO that has –118 dBc @ 1 Hz with a –175 dBc noise floor. Not cheap though. Also Low G sensitive oscillators. 5 x 10E-11/g. Contact me off list as I’m trying not to advertise on this forum. Best Regards Martyn martyn@ptsyst.com *****************************************

Bill

Wed, Dec 3, 2014 4:29 PM

Hi Martyn,

Would you dare to share where you get your crystals??

Regards...Bill

-----Original Message-----
From: time-nuts [mailto:time-nuts-bounces@febo.com] On Behalf Of Martyn Smith
Sent: Wednesday, December 03, 2014 1:39 AM
To: time-nuts@febo.com
Subject: [time-nuts] 10 MHz Oscillators

Hello,

Ulrich was asking about 10 MHz oscillators.

We make a 10 MHz OXCO that has –118 dBc @ 1 Hz with a –175 dBc noise floor.

Not cheap though.

Also Low G sensitive oscillators. 5 x 10E-11/g.

Contact me off list as I’m trying not to advertise on this forum.

Best Regards

Martyn

martyn@ptsyst.com

time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.

Hi Martyn, Would you dare to share where you get your crystals?? Regards...Bill -----Original Message----- From: time-nuts [mailto:time-nuts-bounces@febo.com] On Behalf Of Martyn Smith Sent: Wednesday, December 03, 2014 1:39 AM To: time-nuts@febo.com Subject: [time-nuts] 10 MHz Oscillators Hello, Ulrich was asking about 10 MHz oscillators. We make a 10 MHz OXCO that has –118 dBc @ 1 Hz with a –175 dBc noise floor. Not cheap though. Also Low G sensitive oscillators. 5 x 10E-11/g. Contact me off list as I’m trying not to advertise on this forum. Best Regards Martyn martyn@ptsyst.com ***************************************** _______________________________________________ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.