time-nuts@lists.febo.com

Discussion of precise time and frequency measurement

View all threads

Re: [time-nuts] Isotemp OCXO36-54M pinout needed

CD
Corby Dawson
Wed, Jan 21, 2009 5:29 PM

Hi,

I bought an  Isotemp OCXO36-54M a couple years ago on eBay and used it
for a short while.

I wanted to run some tests on it but I can't find the pinout!

Can anyone help?

Much Appreciated!

Corby Dawson


Find the right voice for your project by clicking here!
http://thirdpartyoffers.juno.com/TGL2141/fc/PnY6rw2M9w0AqImkBFZYOgNquPMf3ToZyBWbufcSkFbWCLUKG2ZPr/

Hi, I bought an Isotemp OCXO36-54M a couple years ago on eBay and used it for a short while. I wanted to run some tests on it but I can't find the pinout! Can anyone help? Much Appreciated! Corby Dawson ____________________________________________________________ Find the right voice for your project by clicking here! http://thirdpartyoffers.juno.com/TGL2141/fc/PnY6rw2M9w0AqImkBFZYOgNquPMf3ToZyBWbufcSkFbWCLUKG2ZPr/
W
WB6BNQ
Wed, Jan 21, 2009 5:39 PM

Hi Corby,

Took a while to find it, but I knew I had uploaded the data. Half way down this page from KO4BB's
site.

http://www.ko4bb.com/cgi-bin/manuals.pl?dir=05)_GPS_Timing

Bill....WB6BNQ

Corby Dawson wrote:

Hi,

I bought an  Isotemp OCXO36-54M a couple years ago on eBay and used it
for a short while.

I wanted to run some tests on it but I can't find the pinout!

Can anyone help?

Much Appreciated!

Corby Dawson


Find the right voice for your project by clicking here!
http://thirdpartyoffers.juno.com/TGL2141/fc/PnY6rw2M9w0AqImkBFZYOgNquPMf3ToZyBWbufcSkFbWCLUKG2ZPr/


time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.

Hi Corby, Took a while to find it, but I knew I had uploaded the data. Half way down this page from KO4BB's site. http://www.ko4bb.com/cgi-bin/manuals.pl?dir=05)_GPS_Timing Bill....WB6BNQ Corby Dawson wrote: > Hi, > > I bought an Isotemp OCXO36-54M a couple years ago on eBay and used it > for a short while. > > I wanted to run some tests on it but I can't find the pinout! > > Can anyone help? > > Much Appreciated! > > Corby Dawson > ____________________________________________________________ > Find the right voice for your project by clicking here! > http://thirdpartyoffers.juno.com/TGL2141/fc/PnY6rw2M9w0AqImkBFZYOgNquPMf3ToZyBWbufcSkFbWCLUKG2ZPr/ > > _______________________________________________ > time-nuts mailing list -- time-nuts@febo.com > To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there.
W
WB6BNQ
Wed, Jan 21, 2009 5:42 PM

Corby,

My BAD !  I got as far as the word ISOTEMP and failed to pay attention to the part number.  Sorry about
that.

Bill....WB6BNQ

WB6BNQ wrote:

Hi Corby,

Took a while to find it, but I knew I had uploaded the data. Half way down this page from KO4BB's
site.

http://www.ko4bb.com/cgi-bin/manuals.pl?dir=05)_GPS_Timing

Bill....WB6BNQ

Corby Dawson wrote:

Hi,

I bought an  Isotemp OCXO36-54M a couple years ago on eBay and used it
for a short while.

I wanted to run some tests on it but I can't find the pinout!

Can anyone help?

Much Appreciated!

Corby Dawson


Find the right voice for your project by clicking here!
http://thirdpartyoffers.juno.com/TGL2141/fc/PnY6rw2M9w0AqImkBFZYOgNquPMf3ToZyBWbufcSkFbWCLUKG2ZPr/


time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.


time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.

Corby, My BAD ! I got as far as the word ISOTEMP and failed to pay attention to the part number. Sorry about that. Bill....WB6BNQ WB6BNQ wrote: > Hi Corby, > > Took a while to find it, but I knew I had uploaded the data. Half way down this page from KO4BB's > site. > > http://www.ko4bb.com/cgi-bin/manuals.pl?dir=05)_GPS_Timing > > Bill....WB6BNQ > > Corby Dawson wrote: > > > Hi, > > > > I bought an Isotemp OCXO36-54M a couple years ago on eBay and used it > > for a short while. > > > > I wanted to run some tests on it but I can't find the pinout! > > > > Can anyone help? > > > > Much Appreciated! > > > > Corby Dawson > > ____________________________________________________________ > > Find the right voice for your project by clicking here! > > http://thirdpartyoffers.juno.com/TGL2141/fc/PnY6rw2M9w0AqImkBFZYOgNquPMf3ToZyBWbufcSkFbWCLUKG2ZPr/ > > > > _______________________________________________ > > time-nuts mailing list -- time-nuts@febo.com > > To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > > and follow the instructions there. > > _______________________________________________ > time-nuts mailing list -- time-nuts@febo.com > To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there.